Ls7 custom cam.Spring Height ?
Thread Starter
Teching In
Joined: Aug 2015
Posts: 6
Likes: 0
From: Haliburton,ON
Ls7 custom cam.Spring Height ? Hey Everyone
I am new to the ls world and trying to figure out what I need for a installed spring height on a ls7 with a custom cam.Both intake and exhaust are just under .660 lift. I have a BTR lsx spring kit with shims and TI retainers.It says 1.78 install height does this sound right. On #1 cyclinder I have had to add the 30 thou shim on both valves (int/exh) to have it very close to this #.
Just don't want any mistakes as it is a new crate engine with a wet sump conversion.
Thanks for listening
I am new to the ls world and trying to figure out what I need for a installed spring height on a ls7 with a custom cam.Both intake and exhaust are just under .660 lift. I have a BTR lsx spring kit with shims and TI retainers.It says 1.78 install height does this sound right. On #1 cyclinder I have had to add the 30 thou shim on both valves (int/exh) to have it very close to this #.
Just don't want any mistakes as it is a new crate engine with a wet sump conversion.
Thanks for listening
