Hardware and Electronics
Thread Starter
Teching In
Joined: Jul 2015
Posts: 18
Likes: 0
From: In Sunny Alberta Canada
Hardware and Electronics Hi
I purchased an LS3 525HP Crate Engine. I am putting it into my C2 Corvette on a roadstershop frame.
I do not want to hack to much of the tunnel so am staying with the 4L75E that GM provides for this engine.
My question is, I have not purchased ECM, harness or TCU yet and would like to run HPTuner when all up and running.
So, GM equipment or 3rd Party? If you were building this would you buy 3rd party?
I have posted this on HPTuner Forum as well to see what their answers are.
Thanks in advance
Dennis
I purchased an LS3 525HP Crate Engine. I am putting it into my C2 Corvette on a roadstershop frame.
I do not want to hack to much of the tunnel so am staying with the 4L75E that GM provides for this engine.
My question is, I have not purchased ECM, harness or TCU yet and would like to run HPTuner when all up and running.
So, GM equipment or 3rd Party? If you were building this would you buy 3rd party?
I have posted this on HPTuner Forum as well to see what their answers are.
Thanks in advance
Dennis
We offer a harness for the LS3/4L75E using the factory E38 ECM and T42 TCM. You will have full access with HPTuners using this setup.
__________________
Your Source for LSX Conversion Parts!
www.psiconversion.com
Ebay Store
Facebook/psiconversion
Instagram/psiconversion
'Dont Let EFI Pass You By!'
Your Source for LSX Conversion Parts!
www.psiconversion.com
Ebay Store
Facebook/psiconversion
Instagram/psiconversion
'Dont Let EFI Pass You By!'
