Valve Cover Conversion
Thread Starter
Teching In
Joined: Mar 2019
Posts: 5
Likes: 0
From: Marietta, GA
Valve Cover Conversion Has anyone installed Billet Specialties hidden coil valve cover conversion kit with a Whipple supercharger? http://www.billetspecialties.com/ls-...nversion-kit-/
I want to hide the coils and have the option to pick from a large assortment of SBC valve covers. Not sure if there would be clearance issues with the blower drive shaft.
I want to hide the coils and have the option to pick from a large assortment of SBC valve covers. Not sure if there would be clearance issues with the blower drive shaft.
TECH Fanatic
Joined: Sep 2005
Posts: 1,584
Likes: 23
From: NYC
The problem with those is: 1- High price, 2- no PCV baffles, 3- no fresh air in barb, 4- no vacuum barb. You would be better off with a cover for the OE valve cover like the Edelbrock coil covers. There will be no clearance issues with them.
Thread Starter
Teching In
Joined: Mar 2019
Posts: 5
Likes: 0
From: Marietta, GA
Holley makes one that is much cheaper and it has PCV barbs that will work with VCs that have baffle ports so I can run a dual catch can setup like the one described on this page: https://www.superchargerforums.com/t...re-blown.2472/
TECH Fanatic
Joined: Sep 2005
Posts: 1,584
Likes: 23
From: NYC
I bought those Holley covers and they pulled the oil out of the crankcase and I sold them... Many people have had problems with them and go back to OE covers: https://ls1tech.com/forums/generatio...nsumption.html