aftermarket ECU - Urgent Wiring Help
08-08-2007, 11:10 AM
#1
Teching In
Thread Starter
Join Date: Feb 2007
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
aftermarket ECU - Urgent Wiring Help I am installing an LS7 engine in an Ultima GTR and using a MOTEC M800 ECU
I am based in the UK and could not find a firm locally that really wanted to do the engine loom so am doing it myself.
I now have all the factory connectors / pigtails but am struggling to get hold of a wiring diagram / pin layouts for the main sensors.
Specifically does anyone know the pin layouts for CAM, CRANK, Oil Pressure and LS6 TPS and Coil packs.
On the coil packs I normally would just have two wires (12v and ECU taking to Earth) what are the other pins for?
Many many thanks in advance for any help.
David
I am based in the UK and could not find a firm locally that really wanted to do the engine loom so am doing it myself.
I now have all the factory connectors / pigtails but am struggling to get hold of a wiring diagram / pin layouts for the main sensors.
Specifically does anyone know the pin layouts for CAM, CRANK, Oil Pressure and LS6 TPS and Coil packs.
On the coil packs I normally would just have two wires (12v and ECU taking to Earth) what are the other pins for?
Many many thanks in advance for any help.
David
