LS7 Intake Manifold Options
Honestly, I'm having an engine built, big cubes ls7 heads, and I am researching the options right now for the intake.
Your post is absolute gibbirish. Snap? I'll ******* snap if I have to read another post from you with that absolute ******* kindergarden structure.
You might have some information and it might even be great, but when you cant even ******* type it in any legible language it useless. This isnt hip hop corner. Try forming complete thoughts and then typing them out completely.
On The Tree
Joined: Apr 2004
Posts: 157
Likes: 0
From: Brampton, Ontario
I'm currently building up a LS7 based 440ci w/ LS7 heads.
Anyone work out a way to install a 100mm T/B on a LS7 intake?
All the piping before and including the T/B can be had at 100mm, but it's all useless unless some-one opens up the snout on these intakes to over 100mm.
I'm going to get my hands on a 100mm T/B in a few days, then the search is on to find somone that can open up the LS7 snout.
Anyone work out a way to install a 100mm T/B on a LS7 intake?
All the piping before and including the T/B can be had at 100mm, but it's all useless unless some-one opens up the snout on these intakes to over 100mm.
I'm going to get my hands on a 100mm T/B in a few days, then the search is on to find somone that can open up the LS7 snout.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Five Reasons the Camaro Was the Most Pivotal Player in the Pony Car Wars 2.0
Brett Foote
10 Reasons the LS7 Is GM's Most Extreme Naturally Aspirated V8 Engine Ever
Verdad Gallardo I'm currently building up a LS7 based 440ci w/ LS7 heads.
Anyone work out a way to install a 100mm T/B on a LS7 intake?
All the piping before and including the T/B can be had at 100mm, but it's all useless unless some-one opens up the snout on these intakes to over 100mm.
I'm going to get my hands on a 100mm T/B in a few days, then the search is on to find somone that can open up the LS7 snout.
Anyone work out a way to install a 100mm T/B on a LS7 intake?
All the piping before and including the T/B can be had at 100mm, but it's all useless unless some-one opens up the snout on these intakes to over 100mm.
I'm going to get my hands on a 100mm T/B in a few days, then the search is on to find somone that can open up the LS7 snout.
TECH Apprentice
Joined: May 2005
Posts: 303
Likes: 0
From: toronto
Try typing it in French if you cant handle legible English.
Honestly, I'm having an engine built, big cubes ls7 heads, and I am researching the options right now for the intake.
Your post is absolute gibbirish. Snap? I'll ******* snap if I have to read another post from you with that absolute ******* kindergarden structure.
You might have some information and it might even be great, but when you cant even ******* type it in any legible language it useless. This isnt hip hop corner. Try forming complete thoughts and then typing them out completely.
Honestly, I'm having an engine built, big cubes ls7 heads, and I am researching the options right now for the intake.
Your post is absolute gibbirish. Snap? I'll ******* snap if I have to read another post from you with that absolute ******* kindergarden structure.
You might have some information and it might even be great, but when you cant even ******* type it in any legible language it useless. This isnt hip hop corner. Try forming complete thoughts and then typing them out completely.
Hey Einstein is plumbed not plumped. Its not about English its about coherent thoughts and actualy following rules as well with your advertising.
500 for labor to plump LMAO! What the hell is that? You going to pump a turkey for us?
500 for labor to plump LMAO! What the hell is that? You going to pump a turkey for us?
TECH Apprentice
Joined: May 2005
Posts: 303
Likes: 0
From: toronto
and no that is if you were local........ i can pump you till you feel like a turkey !!! 
On The Tree
Joined: Apr 2004
Posts: 157
Likes: 0
From: Brampton, Ontario
Will do. Dave at Canadian Performance has a lead on a local shop that likely could custom fab a 100mm snout on a LS7 intake. Likely won't be cheap, but that’s the price you pay for innovation.
If I can get one, I'll do a dyno comparison. Want to put the question to rest once and for all whether the 90mm T/B is a restriction that many people are noticing with big cube motors, which I also subscribe to.
Lots of 'if's' but if there's actually a noteworthy gain, Dave will have a few made up.
If I can get one, I'll do a dyno comparison. Want to put the question to rest once and for all whether the 90mm T/B is a restriction that many people are noticing with big cube motors, which I also subscribe to.
Lots of 'if's' but if there's actually a noteworthy gain, Dave will have a few made up.
Last edited by tlaselva; Dec 19, 2007 at 04:44 PM.
Teching In
Joined: Aug 2005
Posts: 18
Likes: 0
From: Buffalo, NY
for your information you might want to look in the mirror !!! before handing out leson's sorry if i'm not your prinsess typing 60 words per minete..and one more thing i'm not selling anything for anyone ...other then a ls7 intake directport ported & plumped with a 3 month old tnt kit for $1000 ....witch cost me $300 for intake $1100 for kit $500 for labor to plump ...email..me [not my tuner ] roythomas00@hotmail.com
This guy should get perma banned!!!!! I posted on where to go for a good forged motor and he politely pm'd to a shop called Redline. He told me to call a guy named Wade S. I didn't put 2 and 2 together until someone pointed out that this Wade guy was an ex Agostino, head honcho-the guy reponsible for ripping off dozens of people on this board and who know's how many others!!!!!!I know of at least 2 guys who siad they got junk motors and scammed by these Agostino criminals!!!! From what I was told they have a couple of 6 foot pits already for them-tombstones and all!!!!! TECH Apprentice
Joined: May 2005
Posts: 303
Likes: 0
From: toronto
This guy should get perma banned!!!!! I posted on where to go for a good forged motor and he politely pm'd to a shop called Redline. He told me to call a guy named Wade S. I didn't put 2 and 2 together until someone pointed out that this Wade guy was an ex Agostino, head honcho-the guy reponsible for ripping off dozens of people on this board and who know's how many others!!!!!!I know of at least 2 guys who siad they got junk motors and scammed by these Agostino criminals!!!! From what I was told they have a couple of 6 foot pits already for them-tombstones and all!!!!! 
OH your a real ruff guy on computer !!!! you have no respect for the tread topic witch is ls7 intake & option's...for that ...once you open grammar school ..i will consider inbetween dog training /running a fitness club / drag racing .. and no that is if you were local........ i can pump you till you feel like a turkey !!!
and no that is if you were local........ i can pump you till you feel like a turkey !!! 
Your a tool ! Stroker r/t=
You really think your going to sell a plumped intake on here with your assinine attitude?
Last edited by 99blancoSS; Dec 19, 2007 at 07:50 PM.
TECH Apprentice
Joined: May 2005
Posts: 303
Likes: 0
From: toronto
You truely are a complete idiot. Who cares about your dog training or fitness club. Are you that desperate for attention you try and brag and throw you hairy chest out on the internet? Your a tool ! Stroker r/t=
You really think your going to sell a plumped intake on here with your assinine attitude?
Your a tool ! Stroker r/t=You really think your going to sell a plumped intake on here with your assinine attitude?
This thread is done.
Original starter, I apologize. Feel free to start a new thread, and PM me directly if any more problems such as this arise.
Stroker R/T, you need to STAY out of people's threads if you can't respond in a level headed, clear, and SANE manner.
Others, don't encourage this kind of behavior.
-Staff
Original starter, I apologize. Feel free to start a new thread, and PM me directly if any more problems such as this arise.
Stroker R/T, you need to STAY out of people's threads if you can't respond in a level headed, clear, and SANE manner.
Others, don't encourage this kind of behavior.
-Staff
