LS2 2 piece timing cover needed
07-03-2008, 12:53 PM
#23
FormerVendor
iTrader: (6)
Join Date: Mar 2006
Location: "Sin City" Las Vegas
Posts: 520
Likes: 0
Received 0 Likes
on
0 Posts
I have the QTP lS2 model.
Although it is an excellent piece, And damn good looking, if you are running a double roller t-chain, BE PREPARED to take a dremel to the inside. I was pissed off when mine didnt fit with the N-motion double roller and melling pump.
They clearenced MOST of the places that needed to be taken care of, but not everywhere. So if your runnning a bouble roller, get out your dremel.
Hit up Arun over on the "Other" forum. He's got a solution for around 125 bucks..
As with anything, when the new cover comes out, and demand decreases, prices will come down.. That piece needs nearly ZERO structural integrity, so it can be made out of whatever material will work.
That being said, I love my QTP cover....I just wish for the price, they would concentrate on a perfect fit for double roller setups. cause there is ALOT of material left. Unlke the stock cover..
Although it is an excellent piece, And damn good looking, if you are running a double roller t-chain, BE PREPARED to take a dremel to the inside. I was pissed off when mine didnt fit with the N-motion double roller and melling pump.
They clearenced MOST of the places that needed to be taken care of, but not everywhere. So if your runnning a bouble roller, get out your dremel.
Hit up Arun over on the "Other" forum. He's got a solution for around 125 bucks..
As with anything, when the new cover comes out, and demand decreases, prices will come down.. That piece needs nearly ZERO structural integrity, so it can be made out of whatever material will work.
That being said, I love my QTP cover....I just wish for the price, they would concentrate on a perfect fit for double roller setups. cause there is ALOT of material left. Unlke the stock cover..
07-03-2008, 09:49 PM
#24
TECH Enthusiast
iTrader: (13)
Join Date: Nov 2006
Location: Right across the river from Huntington, WV
Posts: 698
Likes: 0
Received 1 Like
on
1 Post
I have the QTP lS2 model.
Although it is an excellent piece, And damn good looking, if you are running a double roller t-chain, BE PREPARED to take a dremel to the inside. I was pissed off when mine didnt fit with the N-motion double roller and melling pump.
They clearenced MOST of the places that needed to be taken care of, but not everywhere. So if your runnning a bouble roller, get out your dremel.
Hit up Arun over on the "Other" forum. He's got a solution for around 125 bucks..
As with anything, when the new cover comes out, and demand decreases, prices will come down.. That piece needs nearly ZERO structural integrity, so it can be made out of whatever material will work.
That being said, I love my QTP cover....I just wish for the price, they would concentrate on a perfect fit for double roller setups. cause there is ALOT of material left. Unlke the stock cover..
Although it is an excellent piece, And damn good looking, if you are running a double roller t-chain, BE PREPARED to take a dremel to the inside. I was pissed off when mine didnt fit with the N-motion double roller and melling pump.
They clearenced MOST of the places that needed to be taken care of, but not everywhere. So if your runnning a bouble roller, get out your dremel.
Hit up Arun over on the "Other" forum. He's got a solution for around 125 bucks..
As with anything, when the new cover comes out, and demand decreases, prices will come down.. That piece needs nearly ZERO structural integrity, so it can be made out of whatever material will work.
That being said, I love my QTP cover....I just wish for the price, they would concentrate on a perfect fit for double roller setups. cause there is ALOT of material left. Unlke the stock cover..
07-05-2008, 11:21 AM
#30
Teching In
iTrader: (2)
Join Date: Aug 2007
Location: DFW
Posts: 44
Likes: 0
Received 0 Likes
on
0 Posts
Thanks, I have a C5 and it is a pita to get in for a cam swap so this way if I ever want to change this will be well worth the money 
The cam I am going with is a bit larger than I originally was planning so this will easily pay for itself if I dont like it.
The cam I am going with is a bit larger than I originally was planning so this will easily pay for itself if I dont like it. 
07-06-2008, 07:09 AM
#33
TECH Regular
iTrader: (24)
Join Date: Nov 2004
Location: Omaha
Posts: 495
Likes: 0
Received 0 Likes
on
0 Posts
I got the ls1 cover. I ordered it from and jegs, and the tracking numbers say it will be here monday. I only ordered it in march, but I guess better late than never. hehe.
07-30-2008, 10:51 AM
#40
Teching In
iTrader: (2)
Join Date: Aug 2007
Location: DFW
Posts: 44
Likes: 0
Received 0 Likes
on
0 Posts
Even worse they gave me a LS2 cover plate with the cam sensor hole. I called edelbrock and they said that I might have to wait until they do another production run, mid august
I think I am sending it back
I think I am sending it back
Last edited by Bcar; 07-30-2008 at 11:12 AM.