just messing. good stuff 
Kooks Revised F-body Header
Thread Starter
LS1TECH Sponsor
Joined: Aug 2005
Posts: 151
Likes: 1
From: Statesville NC
Kooks Revised F-body Header We here at Kooks Custom Headers have strived for 45 years to bring the general public and the racing community the highest quality Header and exhaust systems in the world. We would like to introduce the newest version of the F-Body header. The Changes that you will see are our Stamped merge collectors on all F-Body headers now comes standard at no additional cost to the consumer. We have also incorporated an extra 02 bung in the driver side collector for A/F ratio or wide band for dyno tuning purposes. We will also include a stainless steel plug for the extra bung if it is not going to be put to use. All this is in addition to our normal Kooks craftsmanship like 304S/S construction throughout including the y pipe; all hardware is included from the clamps to the gaskets to the new bolt kit. Produced here in our 24,000 square foot facility located right here in Long Island, NY all this with not a single increase in cost to the consumer.
Last edited by GeorgeR@kooks; Jun 12, 2008 at 04:01 PM.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Five Reasons the Camaro Was the Most Pivotal Player in the Pony Car Wars 2.0
Brett Foote
10 Reasons the LS7 Is GM's Most Extreme Naturally Aspirated V8 Engine Ever
Verdad Gallardo
hahaha I was thinking the same thing! my brand new 1-7/8ths didn't come with that.
on a serious note wouldn't it be better for the wide band to be in a position where it can get a reading from both cylinders not just one?
on a serious note wouldn't it be better for the wide band to be in a position where it can get a reading from both cylinders not just one?
FormerVendor
Joined: Jun 2008
Posts: 58
Likes: 0
Branden has actually posted some pics and info on another thread:
https://ls1tech.com/forums/new-products-showcase/938052-important-changes-kooks-ls1-headers-new-merge-collector-more.html
Hope that helps!
https://ls1tech.com/forums/new-products-showcase/938052-important-changes-kooks-ls1-headers-new-merge-collector-more.html
Hope that helps!
Sweet.
Can you provide 4-5 pics of the inside of the collector? I'm mostly focused on where the primaries adjoin together and the way they are adjoined before I spend any money.
Can you provide 4-5 pics of the inside of the collector? I'm mostly focused on where the primaries adjoin together and the way they are adjoined before I spend any money.
