4in mufflers
#41
On The Tree
iTrader: (42)
Join Date: Nov 2005
Location: TX
Posts: 159
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I just picked up an AFE muffler from ebay.
I did some searching and the part number they list is supposed to be a louvered core despite what the auction says. Not quite ideal but I could not pass it up for the price.
The muffler arrived last week and to my surprise it actually is perforated core. Its a bit long but it just barely fits in my application. I would imagine it could be cut down and re-welded if necessary.
Ill be using a set of modified 98 vette manifolds through a 3" Y and 4" rear section.
Ill try to get a video up once the car starts. Should be before the end of the month.
http://cgi.ebay.com/ebaymotors/AFE-D...spagenameZWDVW
I did some searching and the part number they list is supposed to be a louvered core despite what the auction says. Not quite ideal but I could not pass it up for the price.
The muffler arrived last week and to my surprise it actually is perforated core. Its a bit long but it just barely fits in my application. I would imagine it could be cut down and re-welded if necessary.
Ill be using a set of modified 98 vette manifolds through a 3" Y and 4" rear section.
Ill try to get a video up once the car starts. Should be before the end of the month.
http://cgi.ebay.com/ebaymotors/AFE-D...spagenameZWDVW
Last edited by NoClassic; 07-28-2008 at 01:23 AM.