What cam for a 427 supercharged engine

Reply Subscribe

Thread Tools

Search this Thread

Dec 2, 2008 | 07:08 AM

BigRich954RR

Thread Starter

TECH Fanatic

iTrader: (1)

Joined: Nov 2007

Posts: 1,193

Likes: 0

From: NJ

What cam for a 427 supercharged engine

Looking for good idle good driving manners power peaking around 6500.
thinking dur @.50 230int 240ex lift 600 600 115-116

looking for some ideas

if anybody has any video clips of a 427 cammed please link me to them.

Dec 2, 2008 | 09:16 AM

ringram

TECH Fanatic

Joined: Aug 2005

Posts: 1,691

Likes: 1

From: Sunny London, UK

Sounds like you need the stock cam

Or what about the GM torquer cam?

Dec 2, 2008 | 08:28 PM

Gary98Z

TECH Apprentice

iTrader: (9)

Joined: Nov 2001

Posts: 375

Likes: 1

From: Kansas City, MO

Have you checked out the EPP blower cam? 232/240 115 are the specs I think. It should have good drivability, especially with a 427.

Dec 4, 2008 | 02:22 PM

1blownss

Teching In

iTrader: (3)

Joined: Mar 2007

Posts: 49

Likes: 0

From: indianapolis

I will try and find a vid on this cam for you , I know i have listened to several . It has a slight lope to it at idle but it does not shake the vehicle .
Speed Inc has the cam , it is there SC2 cam (224/232 .581/.595 114)

I have been looking for a cam to really compliment a MP122 or TVS2300 blower . They are seeing about 45-50 ft lbs of tq at the rear wheels on a stock 6.0 motor with a mp112 magnuson blower .
Pulls real hard at 2000 rpm all the way through 6400 rpm

Good luck !