cam guys come on in
Thread Starter
TECH Apprentice
iTrader: (30)
Joined: Apr 2007
Posts: 321
Likes: 0
From: milton florida
cam guys come on in ok, i have a 402cid with callies crank and rods and ross pistons with -8cc dish. i am using trick flow 225cnc heads milled to 61cc cumbustion chanbers. i have a 3400 lb car with a 4400 stall and 3.73 gears. im going to spray with at least a 150 shot..
i picked up a cam let me know how its going to work..comp cams said it should be good to go..
lift 610 598
dur 242 250
lsa 113+5
i picked up a cam let me know how its going to work..comp cams said it should be good to go..
lift 610 598
dur 242 250
lsa 113+5
ok, i have a 402cid with callies crank and rods and ross pistons with -8cc dish. i am using trick flow 225cnc heads milled to 61cc cumbustion chanbers. i have a 3400 lb car with a 4400 stall and 3.73 gears. im going to spray with at least a 150 shot..
i picked up a cam let me know how its going to work..comp cams said it should be good to go..
lift 610 598
dur 242 250
lsa 113+5
i picked up a cam let me know how its going to work..comp cams said it should be good to go..
lift 610 598
dur 242 250
lsa 113+5
