Injectors
Injectors are the green tops 42lb the same for LS2 & LS1.
http://www.intengineering.com/Shop/C...id/0/SFV/32093
Would these fit on the LS2?
http://www.intengineering.com/Shop/C...id/0/SFV/32093
Would these fit on the LS2?
TECH Resident
Joined: Jun 2007
Posts: 952
Likes: 0
okay well i am only going by the gto and ls2 in your sign ?-
u will have a ev6 plug on the injectors u have now-it came out that way from the factory-
going by the pictures of the injector u posted up that looks like a ev1 plug-
hence why u need the injector pigtail-unless u can get 41 pound injectors with ev6 plugs-
which i have not looked into-
u wont have a problem putting those injectors in the fast intake -u might need some fuel rail spacers for the factory fuel rail as the 42 pounders vs the ls2 injectors are taller-
I hope i am making sense-
u will have a ev6 plug on the injectors u have now-it came out that way from the factory-
going by the pictures of the injector u posted up that looks like a ev1 plug-
hence why u need the injector pigtail-unless u can get 41 pound injectors with ev6 plugs-
which i have not looked into-
u wont have a problem putting those injectors in the fast intake -u might need some fuel rail spacers for the factory fuel rail as the 42 pounders vs the ls2 injectors are taller-
I hope i am making sense-
okay well i am only going by the gto and ls2 ?-
u will have a ev6 plug on the injectors u have no-it came out that way from the factory-
going by the pictures of the injector u posted up that looks like a ev1 plug-
hence why u need the injector pigtail-unless u can get 41 pound injectors with ev6 plugs-
which i have not looked into-
I hope i am making sense-
u will have a ev6 plug on the injectors u have no-it came out that way from the factory-
going by the pictures of the injector u posted up that looks like a ev1 plug-
hence why u need the injector pigtail-unless u can get 41 pound injectors with ev6 plugs-
which i have not looked into-
I hope i am making sense-
What else do I have to buy to get these injectors in? If you can post a link to that
TECH Resident
Joined: Jun 2007
Posts: 952
Likes: 0
TECH Enthusiast
Joined: May 2005
Posts: 689
Likes: 0
From: Perth, Australia
are the green tops 42lb the same for LS2 & LS1.
http://www.intengineering.com/Shop/C...id/0/SFV/32093
Would these fit on the LS2?
http://www.intengineering.com/Shop/C...id/0/SFV/32093
Would these fit on the LS2?
To fit green tops to an LS2 you need this O'Ring & Spacer Kit.
Here's the full instructions for fitting.
http://www.howtogto.com/kb/Article.aspx?id=10360
You also need a set of 8 injector pigtails, to go from your EV6 harness to EV1
injectors.
KAT-A4756 - For using a LS1/LS6 injector with a LS2/LS7 harness.
