TSP LS7 427 Build!!!!
The old 402 ended up spinning 2 main bearings in the bottom end and one of the intake valve springs broke and cracked one of the pistons. THat motor was bad luck since the day it came out of the crate, i had nothing but problems with that one, but thats what you get from speedinc when they dont keep their word.
Sorry to hear about that man but the new power is awesome now
Good luck with everything man are you planning to spray the beast??
Yeah once i get the new tranny in and get my new brake kit put on i am. Im gonna start out with a 150 shot and see how it runs at the lsx shootout in october. Ill probably get jon and jason to give me a hand, and im gonna need madman to set up the suspension.
Do you have any videos out of the Z06, sounds like it should be pretty sick. Yeah man I should have some new videos out in the next couple of weeks.
I Dont want to hijack your thread but here you go
I only have old vid since I sold the twins and wroking on the new single turbo.
30-160mph with 499rwhp 7psi
http://www.youtube.com/watch?v=CTaX3yrZA9A
Dyno
http://www.youtube.com/watch?v=DkvyHLZYa_Q
I only have old vid since I sold the twins and wroking on the new single turbo.
30-160mph with 499rwhp 7psi
http://www.youtube.com/watch?v=CTaX3yrZA9A
Dyno
http://www.youtube.com/watch?v=DkvyHLZYa_Q
Last edited by venom ws7; Aug 28, 2009 at 06:34 PM.
The numbers were very close to 600 down here in florida, with a fairly conservative tune. Ive had speed inc and another company which asked not to be named build motors for me and i ended up tearing them down and rebuilding myself. The guys at TSP know their stuff, MyWs6 got his stuff from them and a lot of friends are extremely happy with their builds from TSP. Call up Jon Reynolds and just see what you guys can come up with.
Your numbers sound very promising though! Sorry to hear about your experience with Speed Inc there local to me and I've seen some really bad *** cars come out of there shop they were one of the companies contacted when I decided I wanted to build a stroker.
by the end of this month
I'm also changing the H/C and adding more compression shooting for 800rwhp on race gas 17-19psi and 700rwhp on pump gas this will be enough to run 9s with full weight M6 Street car 
Good luck with your man and please keep us posted.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo Def, I started pulling the tranny yesterday. I have a lot of work to do, there is a crack in my oil pan so I have to clearance the new one for the crank before I put the tranny back in. I also have to modify the front spindles for the c6 z06 brake kit. Hopefully in about a week or so I should have it back on the road.
