Cam setup with nitrous. Opinions.
Thread Starter
Registered User
Joined: Feb 2009
Posts: 7
Likes: 0
Cam setup with nitrous. Opinions. Hey guys I am new to the site. I just sold my 1001 hp twin turbo cobra and picked up a 2005 z51 c6 with 29k miles.
I am looking to put a cam in it for now. What is a good cam for the ls2? What all is involved with doing a cam on these motors? Not looking for some crazy cam, just something that makes decent power. I also plan on spraying it with about 100-125 shot.
Also where can I find some nice headers for a decent price?
LMK some opinions.
Thanks
-Jaime
BTW I tried searching and couldnt find the answers I was looking for..
I am looking to put a cam in it for now. What is a good cam for the ls2? What all is involved with doing a cam on these motors? Not looking for some crazy cam, just something that makes decent power. I also plan on spraying it with about 100-125 shot.
Also where can I find some nice headers for a decent price?
LMK some opinions.
Thanks
-Jaime
BTW I tried searching and couldnt find the answers I was looking for..
Last edited by jsanders; Feb 14, 2009 at 01:25 PM.
23X/24X 114 (G5X3) is an excellent choice imo. You don't need a N20 cam profile with your intended hp spray amount. Basis it off the combo and goals with the car, and not your N20.
We have been getting excellent results with our Stinger cam. Its a 224/232 113. On the LS2's we are getting 435 all day long conistenly. We have run over 120+mph with cam and also run low 11's with our LS2 setups. This is also an excellent nitrous cam. Has a good lope with excellent drivability. Give me a call or shoot me a pm. We have done this setup on a lot of LS2's. We have also setup nitrous kits on them as well...
TECH Senior Member
iTrader: (3)
Joined: Apr 2006
Posts: 6,524
Likes: 1
From: Western Burbs of Detroit
I say try an LG Motorsports cam too. Get a custom spec'd cam though so you get precisely what you are looking for. As far as headers go, you can't go wrong with the LG Pro Longtubes. Awesome headers bro. I've had mine since 2005 and no issues as all. Even re used them on my 402 build. I re used everything else as well. LOL. LGM's number is in my sig. Ask for Bobby, he'll take care of ya.
Can you post up some info on that 1001 hp Cobra ?? Pics, graphs, whatever you have, I'd like to see it, and I am sure other people would too, even though this is an ls site.
Can you post up some info on that 1001 hp Cobra ?? Pics, graphs, whatever you have, I'd like to see it, and I am sure other people would too, even though this is an ls site.
Thread Starter
Registered User
Joined: Feb 2009
Posts: 7
Likes: 0
Link to pictures:
http://www.fpmotorcars.com/vehicledetails.php?vid=87
I know it says sold but its actually for sale by the guy who built it,he owns a shop and dealership. If anyone is interested he would take 27 plus tax tag title no other fees. Try and replicate this car and it would cost you more than double what he is asking. Has 22k miles now.Car is crazy mint.
His name is sam @coastal dyno here in florida.
Mods:
Teksid aluminum block .20 over deburred
Eagle H beam forged rods
Diamond forged pistons
Forged cryotreated cobra crank
Arp hardware
Ported heads
Custom turbo cams
Sullivan intake manifold
Turbo Horse Power twin turbo kit
Twin 61mm turbos
New style blitz electronic boost controller (I color)
Weldon fuel pump with 10 micron and 100 micron fuel filters -10 Feed and -8 Return lines.
75# RC injectors.
MSD ignition system
Sumped stock tank
Oil filter relocation kit
Stock IRS with brace.
6 spd with DFX clutch
Pro 5.0 shifter
Slotted cross drilled rotors all the way around
Battery relocation
AEM Wideband
Tubular K member
Coilovers in the front
9qt oil pan
Color matched valve covers
To many more mods to list.
708rwhp on 93 pump gas and 17lbs
1001.8rwhp on C16 and 29.5lbs of boost.
Both with 11.1 A/F
About 1500 miles on setup.
http://www.fpmotorcars.com/vehicledetails.php?vid=87
I know it says sold but its actually for sale by the guy who built it,he owns a shop and dealership. If anyone is interested he would take 27 plus tax tag title no other fees. Try and replicate this car and it would cost you more than double what he is asking. Has 22k miles now.Car is crazy mint.
His name is sam @coastal dyno here in florida.
Mods:
Teksid aluminum block .20 over deburred
Eagle H beam forged rods
Diamond forged pistons
Forged cryotreated cobra crank
Arp hardware
Ported heads
Custom turbo cams
Sullivan intake manifold
Turbo Horse Power twin turbo kit
Twin 61mm turbos
New style blitz electronic boost controller (I color)
Weldon fuel pump with 10 micron and 100 micron fuel filters -10 Feed and -8 Return lines.
75# RC injectors.
MSD ignition system
Sumped stock tank
Oil filter relocation kit
Stock IRS with brace.
6 spd with DFX clutch
Pro 5.0 shifter
Slotted cross drilled rotors all the way around
Battery relocation
AEM Wideband
Tubular K member
Coilovers in the front
9qt oil pan
Color matched valve covers
To many more mods to list.
708rwhp on 93 pump gas and 17lbs
1001.8rwhp on C16 and 29.5lbs of boost.
Both with 11.1 A/F
About 1500 miles on setup.
TECH Senior Member
iTrader: (3)
Joined: Apr 2006
Posts: 6,524
Likes: 1
From: Western Burbs of Detroit
Link to pictures:
http://www.fpmotorcars.com/vehicledetails.php?vid=87
I know it says sold but its actually for sale by the guy who built it,he owns a shop and dealership. If anyone is interested he would take 27 plus tax tag title no other fees. Try and replicate this car and it would cost you more than double what he is asking. Has 22k miles now.Car is crazy mint.
His name is sam @coastal dyno here in florida.
Mods:
Teksid aluminum block .20 over deburred
Eagle H beam forged rods
Diamond forged pistons
Forged cryotreated cobra crank
Arp hardware
Ported heads
Custom turbo cams
Sullivan intake manifold
Turbo Horse Power twin turbo kit
Twin 61mm turbos
New style blitz electronic boost controller (I color)
Weldon fuel pump with 10 micron and 100 micron fuel filters -10 Feed and -8 Return lines.
75# RC injectors.
MSD ignition system
Sumped stock tank
Oil filter relocation kit
Stock IRS with brace.
6 spd with DFX clutch
Pro 5.0 shifter
Slotted cross drilled rotors all the way around
Battery relocation
AEM Wideband
Tubular K member
Coilovers in the front
9qt oil pan
Color matched valve covers
To many more mods to list.
708rwhp on 93 pump gas and 17lbs
1001.8rwhp on C16 and 29.5lbs of boost.
Both with 11.1 A/F
About 1500 miles on setup.
http://www.fpmotorcars.com/vehicledetails.php?vid=87
I know it says sold but its actually for sale by the guy who built it,he owns a shop and dealership. If anyone is interested he would take 27 plus tax tag title no other fees. Try and replicate this car and it would cost you more than double what he is asking. Has 22k miles now.Car is crazy mint.
His name is sam @coastal dyno here in florida.
Mods:
Teksid aluminum block .20 over deburred
Eagle H beam forged rods
Diamond forged pistons
Forged cryotreated cobra crank
Arp hardware
Ported heads
Custom turbo cams
Sullivan intake manifold
Turbo Horse Power twin turbo kit
Twin 61mm turbos
New style blitz electronic boost controller (I color)
Weldon fuel pump with 10 micron and 100 micron fuel filters -10 Feed and -8 Return lines.
75# RC injectors.
MSD ignition system
Sumped stock tank
Oil filter relocation kit
Stock IRS with brace.
6 spd with DFX clutch
Pro 5.0 shifter
Slotted cross drilled rotors all the way around
Battery relocation
AEM Wideband
Tubular K member
Coilovers in the front
9qt oil pan
Color matched valve covers
To many more mods to list.
708rwhp on 93 pump gas and 17lbs
1001.8rwhp on C16 and 29.5lbs of boost.
Both with 11.1 A/F
About 1500 miles on setup.
29.5 lbs of boost, holy mackeral !!! That son of a bitch must have flown !! What's the fastest you ever took it ?? How did she handle at high speeds ?? Were you able to get traction at all ?? Any track times ??
SOrry for all the questios, but when someone does a ***** to the wall build it gets my attention. Why did you get rid of it ??
Trending Topics
Thread Starter
Registered User
Joined: Feb 2009
Posts: 7
Likes: 0
29.5 lbs of boost, holy mackeral !!! That son of a bitch must have flown !! What's the fastest you ever took it ?? How did she handle at high speeds ?? Were you able to get traction at all ?? Any track times ??
SOrry for all the questios, but when someone does a ***** to the wall build it gets my attention. Why did you get rid of it ??
SOrry for all the questios, but when someone does a ***** to the wall build it gets my attention. Why did you get rid of it ??
IDK never maxed it out, but the tach stops at 160 and it was still pulling hard. On pump gas with dr's there wasnt any traction at all doesnt matter what gear you were in if you stomped it as soon as boost hit your on the limiter. Never even bothered with race gas on the street. No track times,never went to the track.Handled fantastic at high speeds. Deff a no joke car.
I sold it because I wanted a nice DD instead of a lincoln. The gas mileage and extensive mods always stopped me from driving it.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
