Cam Advice 404 Stroker Specs Inside

Reply Subscribe

Thread Tools

Search this Thread

Mar 4, 2009 | 11:23 AM

SlwSVT

Thread Starter

Staging Lane

Joined: Nov 2008

Posts: 96

Likes: 0

From: Belen, NM

Cam Advice 404 Stroker Specs Inside

Hello all,

Building a 404 LS2 stroker and was looking at cam choices. The cam I was recommend is 242/250 .610/.618 114 LSA. Will I have idling, bucking and surging issues with this cam?

Motor is going to be:
404 stroker 11.75-1 compression
243 Heads (330 Intake, 235 Exhaust)
Ported FAST
Supporting Mods

Thanks

Mar 4, 2009 | 12:38 PM

BAM-BAM

11 Second Club

iTrader: (2)

Joined: Sep 2004

Posts: 151

Likes: 0

i had almost that same cam in a 383 it was 242/250 611/619 it was the speed inc cam on there site..they tuned it for me in my a4 and had no issues at all

Mar 4, 2009 | 09:51 PM

blk00ss

TECH Addict

iTrader: (66)

Joined: Feb 2007

Posts: 2,366

Likes: 5

From: Jasper, AL

I ran a 247/254 .615/.615 110 in my 403. And it drove a lot better than my cam only MS4 346. Now I have a 253/257 .625/.625 111+2. Only drove it a few miles, but it didnt seem to be any worse then the old cam. Also it hasnt been retuned for it yet.

Seems the bigger cubes soak up alot of the bad manners of a big lift cam.

Mar 4, 2009 | 09:54 PM

SlwSVT

Thread Starter

Staging Lane

Joined: Nov 2008

Posts: 96

Likes: 0

From: Belen, NM

Thanks for the replies. The other cam choice that I am leaning towards is: 236/242 114+0 XER lobes
Supposedly this will give me great street manners and will be down about 10rwhp to other cam I listed.

Reply Subscribe