The new LSX blocks are in at SDPC
#42
#43
Thread Starter
Joined: Mar 2002
Posts: 3,523
Likes: 33
From: Lubbock, TX
+100 to 120 pounds
__________________
800-456-0211 / PM / Facebook
WHIPPLE Superchargers, Procharger, Magnuson, Powerbond Sale, HPTuners packages!, Trickflow, AFR, PRC, CHE Trunion upgrade, $100 7.400" pushrod set, Custom Cam of your choice
800-456-0211 / PM / Facebook
WHIPPLE Superchargers, Procharger, Magnuson, Powerbond Sale, HPTuners packages!, Trickflow, AFR, PRC, CHE Trunion upgrade, $100 7.400" pushrod set, Custom Cam of your choice
#45
Thread Starter
Joined: Mar 2002
Posts: 3,523
Likes: 33
From: Lubbock, TX
john@scoggin? His email is jginter@sdparts.com
__________________
800-456-0211 / PM / Facebook
WHIPPLE Superchargers, Procharger, Magnuson, Powerbond Sale, HPTuners packages!, Trickflow, AFR, PRC, CHE Trunion upgrade, $100 7.400" pushrod set, Custom Cam of your choice
800-456-0211 / PM / Facebook
WHIPPLE Superchargers, Procharger, Magnuson, Powerbond Sale, HPTuners packages!, Trickflow, AFR, PRC, CHE Trunion upgrade, $100 7.400" pushrod set, Custom Cam of your choice
#47
maybe be a stupid ? but do these bolt up to after market k members (bmr) or even stock k members?
custom headers? or will kooks 1 7/8 work ( i know they'll choke it)
what is the standard cid they are offered in? do you offer 470cid+ for n/a?
custom headers? or will kooks 1 7/8 work ( i know they'll choke it)
what is the standard cid they are offered in? do you offer 470cid+ for n/a?
#48
They have not been tried yet for max CI. They are just like any LSX block in the way they bolt up to an LS vehicle....stock mounts. The NEW block comes with a slightly smaller starting bore, that can be finished out with a 3.622 crank for a 346....we have built them to a 468 before off of a 4.185 bore. Hint: it takes alot of stroke to pull that one off. These newer castings will be insteresting, but if there is just a little more room like gm says, then 470+ CI from this standard deck would not be too much of an issue. Trying to go much more than that is probably pushing it IMO
these are just the blocks themselves, so headers will have to match the heads/cam/CI combo. 1 7/8 is recommended on anything like this really to start.
these are just the blocks themselves, so headers will have to match the heads/cam/CI combo. 1 7/8 is recommended on anything like this really to start.
#50
Thread Starter
Joined: Mar 2002
Posts: 3,523
Likes: 33
From: Lubbock, TX
They told us they were shipping, but we will hesitate to post until they show up.
__________________
800-456-0211 / PM / Facebook
WHIPPLE Superchargers, Procharger, Magnuson, Powerbond Sale, HPTuners packages!, Trickflow, AFR, PRC, CHE Trunion upgrade, $100 7.400" pushrod set, Custom Cam of your choice
800-456-0211 / PM / Facebook
WHIPPLE Superchargers, Procharger, Magnuson, Powerbond Sale, HPTuners packages!, Trickflow, AFR, PRC, CHE Trunion upgrade, $100 7.400" pushrod set, Custom Cam of your choice
#51
And it's really a pain since once people think they are availabe it's your fault that they are not there yet.
My boys told me last week that they were shipping........hence my post.
I bet they sell out quicky once they hit the door
Robin
#54
Thread Starter
Joined: Mar 2002
Posts: 3,523
Likes: 33
From: Lubbock, TX
Tall Deck is HERE. Pictures are uploading, we have multiple available.
__________________
800-456-0211 / PM / Facebook
WHIPPLE Superchargers, Procharger, Magnuson, Powerbond Sale, HPTuners packages!, Trickflow, AFR, PRC, CHE Trunion upgrade, $100 7.400" pushrod set, Custom Cam of your choice
800-456-0211 / PM / Facebook
WHIPPLE Superchargers, Procharger, Magnuson, Powerbond Sale, HPTuners packages!, Trickflow, AFR, PRC, CHE Trunion upgrade, $100 7.400" pushrod set, Custom Cam of your choice