SBF torque plate
Thread Starter
FormerVendor
iTrader: (6)
Joined: Feb 2010
Posts: 900
Likes: 1
From: Elk Grove Village IL
SBF torque plate Been alot of talk about SBF torque plate on LS block.
We installed a 4.200" SBF torque plate to a 6.0 LQ9 block, no modification needed to the torque plate at all.
it does work, its not centered over the bore, however not all combustion chambers are either. It should work up to 4.125", its kind of thin at 9 o'clock position on the bore.
We have 2 LS plates already, no reason to use SBF plate on LS.
heres the results
We installed a 4.200" SBF torque plate to a 6.0 LQ9 block, no modification needed to the torque plate at all.
it does work, its not centered over the bore, however not all combustion chambers are either. It should work up to 4.125", its kind of thin at 9 o'clock position on the bore.
We have 2 LS plates already, no reason to use SBF plate on LS.
heres the results
You must have missed the previous thread that debated this. The LSx and the SBF have a different bore spacing, so there was some speculation as to whether or not a SBF torque plate would fit or not.
