Ws6nighthawk

Ok, i have a buddy with an 05 auto ls2 goat and he needs some help as to what would be the proper mods to do if he wanted to get between 425-450 solid rear wheel horse power? He currently has LT's, stock exhaust flowmaster mufflers without cats and a tune. intake is pretty much stock with a K&N cone filter at the end. If this would be obtainable through just cam and valve train swap could you please note the parts? if anything else should be considered please feel free to add in.

thanks in advance guys, Brian.

Randy@RaginRacin

iTrader: (4)

Uaually on the GTO's we will add CAI, 1 7/8 AR Headers, Port Intake and TB, Use our Stinger Cam. This nets excellent drivability with 425-440rwhp.

Shawn

Ws6nighthawk

so what supporting valve train components will be needed if he does go with your stinger cam?

hivoltagedriver

iTrader: (1)

I agree, a small cam and most of the bolt-ons will get you there. The stock LS2 intake is not the greatest, but you could reach your power goals without replacing it.

Powered By V8

iTrader: (2)

ported ls2 intake, medium cam, stall, maybe throw a UDP for good measure