Head flow vs compression
Thread Starter
Staging Lane
iTrader: (3)
Joined: Dec 2010
Posts: 99
Likes: 0
From: Collinsville ,Illinois
Head flow vs compression I just had my CNC lS3heads milled from 70ccs down to 65.
Now my head flow is right around 315 CFM and the exhaust
is 235 at the same lift, which is at 600 inch lift. My compression
is 11.4 to 1. Or have like 10.6-8 to 1! I was wondering if it would
be worth it to upgrade to higher flowing heads to make more
horse power or just keep what I have and run it?
I want to make as much horse power as I can. It's a 418 LS3 with
fast 102 and a Pat G custom cam.... What do you guys
think???? Thanks in advance.....
Now my head flow is right around 315 CFM and the exhaust
is 235 at the same lift, which is at 600 inch lift. My compression
is 11.4 to 1. Or have like 10.6-8 to 1! I was wondering if it would
be worth it to upgrade to higher flowing heads to make more
horse power or just keep what I have and run it?
I want to make as much horse power as I can. It's a 418 LS3 with
fast 102 and a Pat G custom cam.... What do you guys
think???? Thanks in advance.....
