new cam new stall?
Thread Starter
TECH Fanatic
Joined: Jun 2006
Posts: 1,326
Likes: 0
From: Hayward CA
new cam new stall? hey fellas i just got a new cam specd out by geoff of eps.. and its a 23*/25* 61*/63* /113 lsa
and my stall is currently a 4400 stall in a th400... do i need a bigger stall to make this cam work proper or should i be fine?i was talkin with a buddy of mine n he said that cam is way to small for my stall..and to be driving it around town a bit would kill the tranny..
setup is is lsx based motor with ls3/l92 heads manifold set up..car is a 99 fbody
and my stall is currently a 4400 stall in a th400... do i need a bigger stall to make this cam work proper or should i be fine?i was talkin with a buddy of mine n he said that cam is way to small for my stall..and to be driving it around town a bit would kill the tranny..
setup is is lsx based motor with ls3/l92 heads manifold set up..car is a 99 fbody
Launching!
Joined: Nov 2010
Posts: 251
Likes: 0
Your not telling us anything about ur car.
Weight?
Gear ratio?
DD or pure race or both?
U could get away with less stall I'm sure but the way u actually do it is to dyno the motor and let it's torque curve tell u where it should stall. Custom motors benefit most from custom stalls IMO.
Weight?
Gear ratio?
DD or pure race or both?
U could get away with less stall I'm sure but the way u actually do it is to dyno the motor and let it's torque curve tell u where it should stall. Custom motors benefit most from custom stalls IMO.
Thread Starter
TECH Fanatic
Joined: Jun 2006
Posts: 1,326
Likes: 0
From: Hayward CA
Gears 3.90, weight of car fbody with me in it should be around 3600...not gonna daily drive it..mostly to car shows or if i get called out lol..so i say 85% track car 15 % street
