Help a 16yrs old guy with his 427 build setup!
Thread Starter
On The Tree
Joined: Oct 2009
Posts: 118
Likes: 0
From: right next to the neighbours
Help a 16yrs old guy with his 427 build setup! Hi Fellas!
As I said , I'm only a 16 yrs old so there's must be a problem with a badass setup.
But first, Speacial thanks to Brayan@speedinc for his help by shipping my things all over the world to the Middle East "Kuwait" <- Where I come from
My car is an 2000 ws6 Trans am...
MY BRAND new Engine specs
- LS1 Darton sleeved block bored to 4.125
- Callies LS7 crankshaft+Compstar rods+-2cc Diomand Pistons= 427 stroker kit
-TEA/TFS 235 heads+ Yella terra non.adj rockers, 114 25x.26x BULLIT cam.
-Fast 102 intake+NW throttle body+fuel lines and 42lb injectors
-FTP 100mm cold air intake + TSP 100mm MAF
-Denali coils + MSD wires
-SLP oil pump+timing chain package
-TFS 7500 pushrods + morel lifters
-SLP Crank pully
-NX Nitrous planing for a 400 shot
& I simply dunno if I forgot anything more :p
This car is gonna be an 100% street car and a Daily use
Questions is:
- I had an brand new kooks 1 7/8 headers until I forgot it's my friends Birthday so I gave them to him as a preasent -.- , So TSP 1 7/8's or the Kooks 1 7/8 ?? ther's almost 400$ difference so is it worth to buy the Kooks headers ?
- What is the best electric water pump for this engine? "with GPM numbers"
- Just threwed my T56 away, Best Transmmision built T56?? with a good price and can handle a 427 power? "Already have an Mcleod Twin disk Clutch
- An good shifter??
- What rear end modification do I have to do for my stock 9 bolt??
Extra Question : I'm working on my other car " A4 1999 H/C Camaro ss, with a lingenfilter gt11 cam , What will be the perfect tourqe converter stall??
Thank you! Waiting for you'r feedback!
Hamad
As I said , I'm only a 16 yrs old so there's must be a problem with a badass setup.
But first, Speacial thanks to Brayan@speedinc for his help by shipping my things all over the world to the Middle East "Kuwait" <- Where I come from
My car is an 2000 ws6 Trans am...
MY BRAND new Engine specs
- LS1 Darton sleeved block bored to 4.125
- Callies LS7 crankshaft+Compstar rods+-2cc Diomand Pistons= 427 stroker kit
-TEA/TFS 235 heads+ Yella terra non.adj rockers, 114 25x.26x BULLIT cam.
-Fast 102 intake+NW throttle body+fuel lines and 42lb injectors
-FTP 100mm cold air intake + TSP 100mm MAF
-Denali coils + MSD wires
-SLP oil pump+timing chain package
-TFS 7500 pushrods + morel lifters
-SLP Crank pully
-NX Nitrous planing for a 400 shot
& I simply dunno if I forgot anything more :p
This car is gonna be an 100% street car and a Daily use
Questions is:
- I had an brand new kooks 1 7/8 headers until I forgot it's my friends Birthday so I gave them to him as a preasent -.- , So TSP 1 7/8's or the Kooks 1 7/8 ?? ther's almost 400$ difference so is it worth to buy the Kooks headers ?
- What is the best electric water pump for this engine? "with GPM numbers"
- Just threwed my T56 away, Best Transmmision built T56?? with a good price and can handle a 427 power? "Already have an Mcleod Twin disk Clutch
- An good shifter??
- What rear end modification do I have to do for my stock 9 bolt??
Extra Question : I'm working on my other car " A4 1999 H/C Camaro ss, with a lingenfilter gt11 cam , What will be the perfect tourqe converter stall??
Thank you! Waiting for you'r feedback!
Hamad
stock rear isnt a 9 bolt its a 10. you either can do a Ford 9" or moser/strange 12 bolt
for the money, TSP headers are plenty good, they all do the same ****
T-56, plenty of sponsors to the right that build them and will be the ones to dictate what you will need.
electric waterpump - why? They may free up a couple of HP but unless you aare gonna be drag racing a lot and in staging lanes
for the money, TSP headers are plenty good, they all do the same ****
T-56, plenty of sponsors to the right that build them and will be the ones to dictate what you will need.
electric waterpump - why? They may free up a couple of HP but unless you aare gonna be drag racing a lot and in staging lanes
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Thread Starter
On The Tree
Joined: Oct 2009
Posts: 118
Likes: 0
From: right next to the neighbours
TECH Fanatic
Joined: Aug 2004
Posts: 1,373
Likes: 4
From: Auckland, Nth Is, New Zealand.
You say you gave headers away & ask about TSP headers, now on the same day you get all in that pic from Speed inc, headers as well.
Me thinks you are a 16-yr old Troll also, and not from where you say you are.
Best you put up some pics of your car & area etc.
Thread Starter
On The Tree
Joined: Oct 2009
Posts: 118
Likes: 0
From: right next to the neighbours
Kind've sounding less Arabic in your thread now, mmmmm
You say you gave headers away & ask about TSP headers, now on the same day you get all in that pic from Speed inc, headers as well.
Me thinks you are a 16-yr old Troll also, and not from where you say you are.
Best you put up some pics of your car & area etc.
You say you gave headers away & ask about TSP headers, now on the same day you get all in that pic from Speed inc, headers as well.
Me thinks you are a 16-yr old Troll also, and not from where you say you are.
Best you put up some pics of your car & area etc.
just add me at Facebook , camaro coz is my name @ FB.
you'll see everything there
Mohammed Alzalzelah aka pontiac slp and his team is building your motor right ? cause I remembered that he informed me about building a 427 for a young guy .. good luck and be safe ... 427ci F-Body can make some damage
Thread Starter
On The Tree
Joined: Oct 2009
Posts: 118
Likes: 0
From: right next to the neighbours
Thank's all for you'r feedback , really appreciate it
I compered the 2" headers with the 1 7/8's on my sold 408ci , the 1 7/8's was a much better choice for a street car.
So I'm going for the 1 7/8's but I'm not sure what brand do I need to go for....
I compered the 2" headers with the 1 7/8's on my sold 408ci , the 1 7/8's was a much better choice for a street car.
So I'm going for the 1 7/8's but I'm not sure what brand do I need to go for....
Thread Starter
On The Tree
Joined: Oct 2009
Posts: 118
Likes: 0
From: right next to the neighbours
I'm one of the team members right now..
Thank you for the such nice words...
& Hell yeah! I'm so close in finishing my project,, can you PM me please ? about the Tick trans you've got and how much did it costs you?