my ls3 h/c combo added twin turbo on my ls2 c6 z51 vette build list
#321
TECH Apprentice
Thread Starter
iTrader: (6)
Join Date: Jan 2012
Posts: 346
Likes: 0
Received 0 Likes
on
0 Posts
Hmm found out.. a while ago when rpm (in nc) installed my ticks, and z06 clutch.. They never installed a new pilot bearing.... I'm curious if a faulty pilot bearing would caused this.. My fault for not replacing it after the first slave I fried...
#322
TECH Apprentice
Thread Starter
iTrader: (6)
Join Date: Jan 2012
Posts: 346
Likes: 0
Received 0 Likes
on
0 Posts
So I been dealing with napa past week.. First bearing I ordered was damaged.. wait another few days to get another... Well this new pilot bearing is to small and they're telling me I have an aftermarket crankshaft because The pilot bearing they ordered was oem spec... well here it is.. one on top is napa "know how" oem pilot bearing for a 06 ls2 c6... mine on bottom.
#325
TECH Regular
iTrader: (9)
Join Date: Dec 2007
Location: Ohio
Posts: 460
Likes: 0
Received 0 Likes
on
0 Posts
Hmm. Still cant see doing all the work to do another clutch and halfass it again with a used clutch regardless the condition. Will it be worth the few bucks you saved now when your doing it again later
Last edited by 1badeagle; 06-25-2012 at 03:06 AM.
#328
TECH Apprentice
Thread Starter
iTrader: (6)
Join Date: Jan 2012
Posts: 346
Likes: 0
Received 0 Likes
on
0 Posts
I was already digging in my saving's ... when I paid for this clutch. The guy I bought it from was a well known vendor on cf and wouldn't steer no-one wrong.. I didn't want to pay more then 500$ at the time anyhow.all because I get stupid with $ when I go home... now that I had this car down here and fried another slave... I wish I stayed with the ls7 and would of bought a brand new one.. Can't change the past and it is what it is..
#330
TECH Apprentice
Thread Starter
iTrader: (6)
Join Date: Jan 2012
Posts: 346
Likes: 0
Received 0 Likes
on
0 Posts
hahahha Awesome... I wish I would of watched this before I went out... Car should be done this Sat latest... but I won't have the tires in until Tuesday-wednesday so we'll have to do a roll.. Shouldn't be that hard to beat a ragity *** maroon c6 vette only putting down 470rwhp n/a. So does the c5 need spray?
#334
TECH Apprentice
Thread Starter
iTrader: (6)
Join Date: Jan 2012
Posts: 346
Likes: 0
Received 0 Likes
on
0 Posts
The only hate is coming from rwhp.us guys... A local forum.. There was a lot of them talking mad ****.. like in this video.. well I call them out.. run your car not your mouth.. That thread made a 47 page's of bs talking until I got banned from the site.. I can't wait to run this guy's 99 frc.. Strange though.. the guy that talks mad **** don't have a car to race yet.. Claims his ls2 cam only z28 will walk me??
#335
Turd Gen Guy
iTrader: (63)
The only hate is coming from rwhp.us guys... A local forum.. There was a lot of them talking mad ****.. like in this video.. well I call them out.. run your car not your mouth.. That thread made a 47 page's of bs talking until I got banned from the site.. I can't wait to run this guy's 99 frc.. Strange though.. the guy that talks mad **** don't have a car to race yet.. Claims his ls2 cam only z28 will walk me??
#336
TECH Apprentice
Thread Starter
iTrader: (6)
Join Date: Jan 2012
Posts: 346
Likes: 0
Received 0 Likes
on
0 Posts
I'm getting it re-dyno sat if my vararam comes in.. should make a little more now with a 22lb lighter clutch set up (monster stage 3 with race flywheel 36lb vs stock z06 56lb), a vararam instead of that k&n air filter, DE-screened maf, 160 stat, and about 12-14 lighter rim/tire... I'm sure I'll pick a little over 10hp with these little mods even with gears..
#338
TECH Apprentice
Thread Starter
iTrader: (6)
Join Date: Jan 2012
Posts: 346
Likes: 0
Received 0 Likes
on
0 Posts
Thanks, i would of got a big loopy cam but I really like street manners of this one.. I would say I got most my power from the ptm l76 intake,tb and with the ls3 cast heads milled..470 is respectable for a ls3 heads ls2 block..I'm about to pull the trigger on a set of m/t et 305/45/18 but I'm trying to figure out how much it'll affect my gearing since I have 3.90 gears.. I could skip out on that and buy a nib 2 stage nitrous plate kit.. I only have 1,200$ car funds left for the next few months
#340
TECH Senior Member
iTrader: (71)
I'm curious what POS doesn't have enough decency to keep bull **** out of peoples threads... Judging by the video I saw, they don't have very good school systems in the area to attend or the parents were on par with them and didn't make them attend.
Good build, coming together nicely.
Good build, coming together nicely.