Those with SDPC or TSP shortblocks.....
Those with SDPC or TSP shortblocks..... Any issues with them? I am narrowing my choice down to them and Livernois for my 418 LS3 shortblock. I am amazed at how many places will not even call a customer back!
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Give us a shout. Like mentioned above, we do 100% of our machining here in house on our own equipment. This allow us to really taylor specs and clearances to your application as well as the ability to turn out these quality engines in time frames we used to never think possible!
http://www.texas-speed.com/t-Enginebuildinfo.aspx
There's a link with a little info about some of the machines we use and the processes we go through to ensure you will receive the best engine possible!
And of course we still have competitive prices when you compare apples to apples
http://www.texas-speed.com/t-Enginebuildinfo.aspx
There's a link with a little info about some of the machines we use and the processes we go through to ensure you will receive the best engine possible!
And of course we still have competitive prices when you compare apples to apples
__________________
Largest Stocking Distributor of LS-x Engines / CHECK OUT OUR NEW WEBSITE!
COMP - FAST - PACESETTER - DIAMOND RACING - EAGLE SPECIALTY PRODUCTS - CALLIES - COMETIC GASKETS
RAM CLUTCHES - MOSER ENGINEERING - KOOK'S HEADERS - ARP - GM BOLTS AND GASKETS - MSD - NGK
POWERBOND - ASP - AND MORE!
Largest Stocking Distributor of LS-x Engines / CHECK OUT OUR NEW WEBSITE!
COMP - FAST - PACESETTER - DIAMOND RACING - EAGLE SPECIALTY PRODUCTS - CALLIES - COMETIC GASKETS
RAM CLUTCHES - MOSER ENGINEERING - KOOK'S HEADERS - ARP - GM BOLTS AND GASKETS - MSD - NGK
POWERBOND - ASP - AND MORE!
Here's a link to the Texas Speed machine shop.
We have one of very few in house machine shops dedicated to LS engines.
We're also the only LS shop in the country with a full cnc engine machining facility.
Every TSP short-block ships cnc digitized & blueprinted on our state of the art Centroid cnc block machine. The result is a block that is correct to blueprint, and everything precision machined down to the smallest details such as cnc stroker clearancing!
The reality is just the cnc block machine cost more than most typical machine shops spend on all their machines combined! But the result of that is we can build a engine that is second to none in the world.
Not to mention we have over 20 engines in stock currently & have a wait time that is very short!!
All of this out of our new state of the art 25,000 sq ft facility!
http://www.texas-speed.com/t-Enginebuildinfo.aspx
http://s851.photobucket.com/albums/a...20Shop%20Tour/
We have one of very few in house machine shops dedicated to LS engines.
We're also the only LS shop in the country with a full cnc engine machining facility.
Every TSP short-block ships cnc digitized & blueprinted on our state of the art Centroid cnc block machine. The result is a block that is correct to blueprint, and everything precision machined down to the smallest details such as cnc stroker clearancing!
The reality is just the cnc block machine cost more than most typical machine shops spend on all their machines combined! But the result of that is we can build a engine that is second to none in the world.
Not to mention we have over 20 engines in stock currently & have a wait time that is very short!!
All of this out of our new state of the art 25,000 sq ft facility!
http://www.texas-speed.com/t-Enginebuildinfo.aspx
http://s851.photobucket.com/albums/a...20Shop%20Tour/
__________________
Jason
Co-Owner, Texas Speed & Performance, Ltd.
2005 Twin Turbo C6
404cid Stroker, 67mm Twins
994rwhp/902lb ft @ 22 psi (mustang dyno) www.Texas-Speed.com
Jason
Co-Owner, Texas Speed & Performance, Ltd.
2005 Twin Turbo C6
404cid Stroker, 67mm Twins
994rwhp/902lb ft @ 22 psi (mustang dyno) www.Texas-Speed.com
TECH Apprentice
Joined: Jan 2002
Posts: 366
Likes: 0
From: Gilbert, AZ
I tried to order a TSP motor but between not getting anyone on the phones, then when I did the "computers were down" then never recieving a quote or any follow up, it wasn't hard to go elsewhere. I was suppose to have a quote sent to me and never got anything so it is hard to purchase anything without a price or quote.
I tried to order a TSP motor but between not getting anyone on the phones, then when I did the "computers were down" then never recieving a quote or any follow up, it wasn't hard to go elsewhere. I was suppose to have a quote sent to me and never got anything so it is hard to purchase anything without a price or quote.
Sorry JC70ss I somehow didn't get a message to me to call you. I'd be happy to talk if you'll send me over a pm with your phone number.
Sorry the lines are busy some guys, we have 16 employees, and 5 of them on the phones. It's just a crazy time of the year so we're working as hard as we can to get back to everyone.
Sorry the lines are busy some guys, we have 16 employees, and 5 of them on the phones. It's just a crazy time of the year so we're working as hard as we can to get back to everyone.
__________________
Jason
Co-Owner, Texas Speed & Performance, Ltd.
2005 Twin Turbo C6
404cid Stroker, 67mm Twins
994rwhp/902lb ft @ 22 psi (mustang dyno) www.Texas-Speed.com
Jason
Co-Owner, Texas Speed & Performance, Ltd.
2005 Twin Turbo C6
404cid Stroker, 67mm Twins
994rwhp/902lb ft @ 22 psi (mustang dyno) www.Texas-Speed.com
TECH Apprentice
Joined: Jan 2002
Posts: 366
Likes: 0
From: Gilbert, AZ
Sorry JC70ss I somehow didn't get a message to me to call you. I'd be happy to talk if you'll send me over a pm with your phone number.
Sorry the lines are busy some guys, we have 16 employees, and 5 of them on the phones. It's just a crazy time of the year so we're working as hard as we can to get back to everyone.
Sorry the lines are busy some guys, we have 16 employees, and 5 of them on the phones. It's just a crazy time of the year so we're working as hard as we can to get back to everyone.
TECH Apprentice
Joined: Oct 2007
Posts: 301
Likes: 20
Watch out there, Jason...somebody at the tax office might see what a sweet setup you guys have and think they need some of it LOL.
I've been through most of TSP's facility, it's a state-of-the-art facility for sure. And good folks to deal with, too!
I've been through most of TSP's facility, it's a state-of-the-art facility for sure. And good folks to deal with, too!