ERL 500ci in F-Body. FITMENT & HEADERS
04-27-2012, 06:24 AM
#1
TECH Regular
Thread Starter
iTrader: (1)
Join Date: Jun 2007
Location: Saudi Arabia, Qatif
Posts: 412
Likes: 0
Received 0 Likes
on
0 Posts
ERL 500ci in F-Body. FITMENT & HEADERS My friend is thinking about getting 500ci for his 98' Z/28 M6
His car has manual steering rack and EWP, so no concern about belt length since he is using BMR alterator bracket
Are there any fitment issues by adding ~ 0.8" with cowl ??
Are there any 2" headers out there to fit this engine in fbody ?
We would like to do it without k-member drop spacers if possible
Thanx
His car has manual steering rack and EWP, so no concern about belt length since he is using BMR alterator bracket
Are there any fitment issues by adding ~ 0.8" with cowl ??
Are there any 2" headers out there to fit this engine in fbody ?
We would like to do it without k-member drop spacers if possible
Thanx
Last edited by Cold Zero; 04-27-2012 at 08:29 AM.
05-02-2012, 07:51 PM
#2
Teching In
Join Date: Nov 2011
Location: New Albany IN
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
I'm sure there will be some custom modifications with the taller deck block in any vehicle. I have personally seen a ERL 500 in a C5 with a LS7 intake on it clear the stock hood. The motor mounts were custom but the car was able to retain all the stock features. AC,PS,CC... It was a very tight fit but it got in there. Hope this helps.
Last edited by EMpowerd3; 05-02-2012 at 08:00 PM.
05-03-2012, 06:43 PM
#4
Teching In
Join Date: Nov 2011
Location: New Albany IN
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
