Lunati Rotating Assembly
Thread Starter
On The Tree
Joined: Jun 2013
Posts: 166
Likes: 0
From: Seattle, WA
Lunati Rotating Assembly I've recently started looking at building a LQ4 stroker motor and recently started reading about the different companies that make these kits. Someone recently mentioned Lunati and how impressed they were with the kit. However, I'm not finding much detailed info online. Before I call them, I'd like to hear from anyone who has used their kit and what their impressions are. Looks like the Texas Speed folks have their crank kits listed but not their rotating assembly.
Anyone with some experience that would like to share?
Anyone with some experience that would like to share?
I've recently started looking at building a LQ4 stroker motor and recently started reading about the different companies that make these kits. Someone recently mentioned Lunati and how impressed they were with the kit. However, I'm not finding much detailed info online. Before I call them, I'd like to hear from anyone who has used their kit and what their impressions are. Looks like the Texas Speed folks have their crank kits listed but not their rotating assembly.
Anyone with some experience that would like to share?
Anyone with some experience that would like to share?
http://www.lunatipower.com/LunatiOnlineCatalog.aspx
Good luck.
Thread Starter
On The Tree
Joined: Jun 2013
Posts: 166
Likes: 0
From: Seattle, WA
The Dyers rods in the kit impress me.
Thanks coSPEED person! Which kit would you recommend? I'm looking to build a non-boosted application. Looking at a 150 shot of nitrous. Mainly a street car, but some track. Its a mild pro-touring car, but I tend to be rough on build (isn't everybody?).
Just curious where you see the Lunati kits fitting in and what you would suggest.
Thanks coSPEED person! Which kit would you recommend? I'm looking to build a non-boosted application. Looking at a 150 shot of nitrous. Mainly a street car, but some track. Its a mild pro-touring car, but I tend to be rough on build (isn't everybody?).
Just curious where you see the Lunati kits fitting in and what you would suggest.
I've used them in a few builds. I typically opt for the Wiseco Piston due to their quality. As far as the cranks/rods, they are very nice, and just as good as the Callies Compstar line.
