Fixing error codes LS7
Thread Starter
Teching In
Joined: Feb 2006
Posts: 16
Likes: 0
Fixing error codes LS7 Just managed to get my REV2 app and wifi odbkey working on my new Iphone today, after several years of not having a device to use it.
Been having issues with tuning, so I was not that surprised to see two error codes:
P0324 - Knock control system error
P0650 - malfunctioning indicator lamp control circuit malfunction.
Disconnected- reconnected both L & R knock sensors - but no joy.
I know about the lamp (the little orange one next to the ODB2 connector presumably.) the odd thing was that when a replacement ECM was supplied to me, had a harness but no lamp. I swapped the lamp over from my other harness, plumbed it up, but it never worked, so ignored it.
Any gems of wisdom to sort this little lot out? Any help gratefully received.
Been having issues with tuning, so I was not that surprised to see two error codes:
P0324 - Knock control system error
P0650 - malfunctioning indicator lamp control circuit malfunction.
Disconnected- reconnected both L & R knock sensors - but no joy.
I know about the lamp (the little orange one next to the ODB2 connector presumably.) the odd thing was that when a replacement ECM was supplied to me, had a harness but no lamp. I swapped the lamp over from my other harness, plumbed it up, but it never worked, so ignored it.
Any gems of wisdom to sort this little lot out? Any help gratefully received.
