musclecarsrock68

I'm slowly getting all my parts together now. My new flat top pistons are on the way along with ls2 rods. I have a set of 799 heads that will be going on it and an ls6 intake. Then it will be going in my 95 k1500. Now I need help with a cam. I want a nice choppy idle, good tq in lower rpms to get this thing goin and as much power up top as possible. It most likly won't go above 6200rpms and isnt a daily driver so it doesnt have to be the most streetible cam ever. Thanks in advace for any input.

lil john

Call Martin @ Tick Performance

stevecritt

iTrader: (3)

^ That's where my next cam is coming from.

lil john

Yeah(good guy) Marin did me a Solid with a nice soft lobe profile .715 Lift. with a 1.8 rocker ratio...Everything can be tailored to your build.

musclecarsrock68

How much would a cam from him cost?

lil john

i think i spent 400 and that was Comp lobes Billet* Bullet... lobes would be 450 it's a extra 50 dollars for there lobes

Sales@Tick

iTrader: (3)

Just a FYI, I think Lil John meant to say Bullet lobes instead of billet. Our cams are ground on billet cores through Comp or Bullet, but a Bullet grind would be 450 dollars where as a Comp grind is 400 dollars.