LY6 pistons w/milled l92 heads
#1
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
The LY6 pistons have a valve relief for the l92 valves. I think the stock chamber size for the heads is 68cc? Would I run into clearance issues if they were milled to 65cc or more?
Only asking because they already have a valve relief with the l92 heads in stock form. So if they were to be milled, wouldn't clearance be worse with a decent sized camshaft?
Only asking because they already have a valve relief with the l92 heads in stock form. So if they were to be milled, wouldn't clearance be worse with a decent sized camshaft?