6.0L // 6.2L // cam // heads // project
#1
6.0L // 6.2L // cam // heads // project
Hello
I need help with my swap project asap,
My engine is
2005 ,6.0L iron block, ported 6.2L, with ls3 pistons off an escalade with a pair of 0823 2012 camero heads hooked to a 4L60 tranny , 2.8 rear gear excel. Mounted on an 83 checy c10 short bed goal is to reach 470 rwhp
I still haven't bought the cam shaft so i need some help choosing a cam. I have to cams in mind
1- Lingenfelter Gt1-1
229 . 231 . 631 . 631 114
2- motion custom
235 . 243 . 623 . 625 , 113
But not necessarily one of those two if you guys know better ones please let me know. And also I wanted to ask about installing a corvette intake manifold with a 102mm cable throttle body due to the budget so if any of you guys ever tried them please let me get some feedback
I need help with my swap project asap,
My engine is
2005 ,6.0L iron block, ported 6.2L, with ls3 pistons off an escalade with a pair of 0823 2012 camero heads hooked to a 4L60 tranny , 2.8 rear gear excel. Mounted on an 83 checy c10 short bed goal is to reach 470 rwhp
I still haven't bought the cam shaft so i need some help choosing a cam. I have to cams in mind
1- Lingenfelter Gt1-1
229 . 231 . 631 . 631 114
2- motion custom
235 . 243 . 623 . 625 , 113
But not necessarily one of those two if you guys know better ones please let me know. And also I wanted to ask about installing a corvette intake manifold with a 102mm cable throttle body due to the budget so if any of you guys ever tried them please let me get some feedback
Last edited by kuwait_truck; 02-01-2015 at 04:28 PM.
#3
Might want to swap rear gears. 3.42:1 maybe.