6.0 build
Thread Starter
Teching In
Joined: May 2015
Posts: 5
Likes: 0
6.0 build Ok guys i need your thoughts im looking at building a 6.0 truck motor. Im wanting to get a stroker kit (it will also be getting the bottle 200 shot)im looking for a durable setup on the internals any ideas
Thread Starter
Teching In
Joined: May 2015
Posts: 5
Likes: 0
I originally wanted a 427 stroker kit but am worried about the 200 shot on the thin walls of the 427 bore. As for price well thats what im trying to get figured out i dont want to break the bank on the rotating assembly but i would like for it to be durable
TECH Fanatic
Joined: Aug 2009
Posts: 1,845
Likes: 255
From: Coast of San Mateo County Between Pacifica & HMB
Where (what state) are you located? I would get a forged
Short block with a 4.0 stroke! from a vendor close to you if possible.
MMS 220 Heads, MAMOFIED FAST LSXRT Truck Intake,
90 MM TB GM or NW92, CAMMOTION cam specced by Tony
For your app + 200 shot. That would be an AWESOME!
Combo.
Short block with a 4.0 stroke! from a vendor close to you if possible.
MMS 220 Heads, MAMOFIED FAST LSXRT Truck Intake,
90 MM TB GM or NW92, CAMMOTION cam specced by Tony
For your app + 200 shot. That would be an AWESOME!
Combo.
Last edited by NAVYBLUE210; May 23, 2015 at 07:19 PM. Reason: Completeness
