gothic_sera

Quick sanity check on my numbers please?

Stock cam base circle 1.552"
My cam 1.425"
Difference 0.127"

Stock pushrod length 7.400"

My heads have been skimmed 0.050"

Stock thickness head gaskets

So:
7.4 - 0.050 + (0.127/2) = 7.4135" length

So with that in mind, stock pushrods should be OK?

BOLO

iTrader: (40)

Your best bet is to check pushrod length with a push rod length checker. It will be better in a long run.