Strub Technologies Trunions Installed
Thread Starter
Teching In
Joined: Apr 2016
Posts: 9
Likes: 0
From: Texas
Strub Technologies Trunions Installed Replaced my Comp Cams trunions with about 4200 miles @ .661 lift with Straub Technologies trunions and bushings, which are very similar to the CHE bushings. This is on my LS7.
The Comps showed some severe wear given the low milleage. Not happy with that.
One thing that may had an effect is that Comp's are lift limited to .660, so they were at the absolute lift limit.
The Straub kits was a straight up swap, no issues with installation.
Check out some pics.
Worn Comps
Straub Technologies Trunions and Bronze bushings:
Video of the Sound:
http://vid36.photobucket.com/albums/...pslg4qcioy.mp4
:thumbs:
The Comps showed some severe wear given the low milleage. Not happy with that.
One thing that may had an effect is that Comp's are lift limited to .660, so they were at the absolute lift limit.
The Straub kits was a straight up swap, no issues with installation.
Check out some pics.
Worn Comps
Straub Technologies Trunions and Bronze bushings:
Video of the Sound:
http://vid36.photobucket.com/albums/...pslg4qcioy.mp4
:thumbs:
