Need help with Stroker build LQ4
#1
Registered User
Thread Starter
Join Date: Dec 2017
Location: Colorado
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Need help with Stroker build LQ4
I need some help with my LQ4 Stroker build
right now I have a LQ4 stripped down to the bare block
and I'm ready to buy a Stroker kit.
I have some 317 heads that I had milled down .030 and First question is- will I be able to run Flat Top Pistons with valve reliefs?
I will be running this on pump gas.
I'm thinking that I'm gonna go with a 415 OR 408 Stroker kit.
I also have a 2.3L Whipple
This motor is going to be daily driven and I just don't know what type of pistons will be ok with my heads milled down?
I'm NOT looking to switch heads. I already have too much time and $ into them
thanks for the help
KB-
right now I have a LQ4 stripped down to the bare block
and I'm ready to buy a Stroker kit.
I have some 317 heads that I had milled down .030 and First question is- will I be able to run Flat Top Pistons with valve reliefs?
I will be running this on pump gas.
I'm thinking that I'm gonna go with a 415 OR 408 Stroker kit.
I also have a 2.3L Whipple
This motor is going to be daily driven and I just don't know what type of pistons will be ok with my heads milled down?
I'm NOT looking to switch heads. I already have too much time and $ into them
thanks for the help
KB-