1_fast_1le

HioSSilver

iTrader: (8)

I just bought a set of speed master ls1 shaft rockers. For a cheapy set up they look great. We'll see how they do soon.

1_fast_1le

can you post some pictures please sir. thanks

HioSSilver

iTrader: (8)

that's the only one i took. But i can take more if you like.

DietCoke

iTrader: (18)

I can see the flex in the tips from here. Good god, they dont even run material out to the roller. Best of luck with that chinesium and shoddy design.

hiltsy855

iTrader: (35)

I ordered a set of PRW LS1 rockers a few years ago. They were pure crap so I returned them.

1_fast_1le

hiltsy855

iTrader: (35)

You can see the roller tip isn't parallel with the trunnion. There were several like these in the set.

G Atsma

Yep, pure garbage!

1_fast_1le

G Atsma

None, can tell just by the pictures. When it's that obvious that the roller is skewed, garbage it is!

HioSSilver

iTrader: (8)

We shall see on my new ones. I know their not the greatest but what convinced me to try a set was some reading up and finding that some of the high dollar rockers broke also. These new junker chinky things look at least as good as my harland sharps and I've seen those break on a friends car. With me running light valves and beehives it should reduce the stress on the rocker some.

I used a set of speed master stainless 1.9 rockers on my uncles 5.3 truck with no issues so far. Even had a set on the ls6 after i fixed the bent valves.

So idk....I'm sure their not the best. But they were good enough when i was adjusting the valves on the 5.3 that i set the adjustment on the rocker the same for all 16 after i noticed the first 3 were identical.

1_fast_1le

HioSSilver

iTrader: (8)

These have a 5yr warranty. Now it may not be worth the paper it's wrote on but hopefully i won't have to find out.

Btw DietCoke.....i can about guarantee these things are not gonna flex. They may break from being a pos but that type of material don't flex....it breaks.

tech@WS6store

iTrader: (2)

The prw are speedmaster/pro comp. Had a circle track guy try them both because he was told they were different. So he got 2 sets of the same thing and had issues with both. I forget exactly what happened but they were such an issue he sold em super cheap just to get rid of em. Prw was a hassle for him also to try and wnty.

HioSSilver

iTrader: (8)

I have a friend that builds circle track ls engines. That's a much harsher environment than a street car engine for all the parts.

tech@WS6store

iTrader: (2)

Right, but he went jesel after spending money more than twice and has no issue now.

hiltsy855

iTrader: (35)

FWIW - I got my PRW's from Amazon and returned them with no hassle. The shaft-mounts don't "look" bad. Let us know how they hold up.

HioSSilver

iTrader: (8)

I am hopeful with skepticism

1_fast_1le

mine don't look bad at all, thats why i asked about others. i out a dial indicator and checked to see the deflection cold with a pac 1208X spring shimmed properaly and it came out right at .650 lift. 3/8 push rod. all and all mine look good only ran them for about 40 mins total so fingers crossed! mine are the shaft mount rockers