My HorsePower Research HPR 468 build
#62
TECH Senior Member
#63
Moderator
iTrader: (4)
Join Date: Jul 2014
Location: My own internal universe
Posts: 10,452
Received 1,852 Likes
on
1,152 Posts
Originally Posted by Jimbo1367
I'll give the guess a shot. I say.......... a lot more than stock.
#64
TECH Senior Member
#66
#68
ModSquad
iTrader: (6)
I’ll bite. I’m going to guesstimate 776hp/650tq. Either way I can’t wait for this to happen for the sake of the intake. Been waiting a while for this.
#70
Moderator
iTrader: (4)
Join Date: Jul 2014
Location: My own internal universe
Posts: 10,452
Received 1,852 Likes
on
1,152 Posts
Assuming we're talking engine dyno, I'm thinking 870 HP. Really just depends on where in the RPM band it peaks.
#72
TECH Regular
Thread Starter
Looking for a peak in the 71-7200 range, I believe we want to keep max set at 7700 (high piston speeds).....I'm not a dedicated 1/4 drag car.
870 would absolutely blow my mind, to be honest..... I think I'll fall short of that number, but we shall see what the intakes are going to do.
Last edited by fnbadaz06; 05-17-2019 at 03:52 PM.
#73
Moderator
iTrader: (4)
Join Date: Jul 2014
Location: My own internal universe
Posts: 10,452
Received 1,852 Likes
on
1,152 Posts
Depends if bhp or rwhp. If you are talking rear wheel I would say 720 range.
#76
TECH Regular
Thread Starter
#78
I'll play too, 712HP 623TQ-655TQ depending on intake
#80
TECH Regular
Thread Starter
Update - An engine dyno upgrade/update did not go as smoothly as planned for our test facility. so we missed our open availability dates.
The dyno has been repaired and tested, but myself and the other players are booked solid thru early July, so we are looking at mid-late July to finally get her strapped on the dyno and testing beginning.
I've got to get it done before John B. departs for his summer vacation home in the Pacific N.W. or I'll be getting some beef for the next 4-5 months LOL
Timing sucks but it's hitting the beginning of real summer time temps here in Phoenix, AZ so I won't be getting any track time until the fall.
The dyno has been repaired and tested, but myself and the other players are booked solid thru early July, so we are looking at mid-late July to finally get her strapped on the dyno and testing beginning.
I've got to get it done before John B. departs for his summer vacation home in the Pacific N.W. or I'll be getting some beef for the next 4-5 months LOL
Timing sucks but it's hitting the beginning of real summer time temps here in Phoenix, AZ so I won't be getting any track time until the fall.
Last edited by fnbadaz06; 06-06-2019 at 10:39 AM.