Frankenstein F710 Series Heads
#41
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Great lesson.....got home and had the chance to get the lesson. little late* Chad has told me a story or 2 of him and Darin growing up.
Another reason i like dealing person 2 person....u get things specifically tailored for your build & Filling the cylinder...been saying the same ....4 a while now fill the cylinder .....
Reason i luv the show: how the universe works... Makes a engine seem so simple. If you don't know something......get with someone with results.
New ? is How well can u fill 8 cylinders not how much Hp, if you fill the cylinder Hp will be there.....it was Stated a factory Ls7 head is good for 880+ hp @ 8k & not Intake limited. Think about that? On factory Valve guides wearing out?
Never Heard of a shaft mounted rocker with wear? Common sense thought....What causes wear? Bad angle or how the valve sets or works in the guide with a factory rocker? I don't get caught up in scientific things on most stuff about a engine as common sense is a MF'er.....You've change guides 2 times from 2 top shops? Think about it.....
Guy asked me once why I chose to use the pro comp casting Ls7 head 4 a small bore
1st) price
2nd) I know a few guys...the Ls7 head test sealed the deal.
Another reason i like dealing person 2 person....u get things specifically tailored for your build & Filling the cylinder...been saying the same ....4 a while now fill the cylinder .....
Reason i luv the show: how the universe works... Makes a engine seem so simple. If you don't know something......get with someone with results.
New ? is How well can u fill 8 cylinders not how much Hp, if you fill the cylinder Hp will be there.....it was Stated a factory Ls7 head is good for 880+ hp @ 8k & not Intake limited. Think about that? On factory Valve guides wearing out?
Never Heard of a shaft mounted rocker with wear? Common sense thought....What causes wear? Bad angle or how the valve sets or works in the guide with a factory rocker? I don't get caught up in scientific things on most stuff about a engine as common sense is a MF'er.....You've change guides 2 times from 2 top shops? Think about it.....
Guy asked me once why I chose to use the pro comp casting Ls7 head 4 a small bore
1st) price
2nd) I know a few guys...the Ls7 head test sealed the deal.
Last edited by Smokey B; 12-21-2019 at 03:38 AM.
#44
Moderator
iTrader: (4)
Join Date: Jul 2014
Location: My own internal universe
Posts: 10,446
Received 1,838 Likes
on
1,146 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Originally Posted by Smokey B
Same head.....Valve angle rolled back to 15 degrees for class racing.... If your @ 10 degrees there is no reason to go back to a 15 degree head.
#45
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
This BS **** locks up a X1 with BS Sales ads...
Darth this the 4th time.... For 1 post ...
i made a thread on YB:
6.2 Hollow stem...Who's there now? JC funny!
No high as, I'm not rich Tia. valves.
SRT8 custom port 4 a small bore....2800 from Mast ...i no a guy.
Not willing 2 type again (x5) who I met today....Short story: Jim gone talked 2 Joe ....no go, same **** i was told on pistons.
But the guy knew Every 1 i could list in H town and the world...BBF 4x4, mud truck,pull truck.
Told me the best 2things in engines and racing R......
The $
The drive....
I can get past a few dollars to get a thought. I luv Specing and making stuff.. Btw the low ram idea with x2 4500's....thing has x2 injectors with a runner under 4 inches...another idea made in 2 a YB thread....wrote it better the last 4 tries.....
B.......i did say i'm a ........answers Wanted...
https://www.yellowbullet.com/threads...2609708/page-3
Darth this the 4th time.... For 1 post ...
i made a thread on YB:
6.2 Hollow stem...Who's there now? JC funny!
No high as, I'm not rich Tia. valves.
SRT8 custom port 4 a small bore....2800 from Mast ...i no a guy.
Not willing 2 type again (x5) who I met today....Short story: Jim gone talked 2 Joe ....no go, same **** i was told on pistons.
But the guy knew Every 1 i could list in H town and the world...BBF 4x4, mud truck,pull truck.
Told me the best 2things in engines and racing R......
The $
The drive....
I can get past a few dollars to get a thought. I luv Specing and making stuff.. Btw the low ram idea with x2 4500's....thing has x2 injectors with a runner under 4 inches...another idea made in 2 a YB thread....wrote it better the last 4 tries.....
B.......i did say i'm a ........answers Wanted...
https://www.yellowbullet.com/threads...2609708/page-3
#47
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Bortous...being a *** hole you Have no fear of what others think.....walk towards the light...
Smoking 1 for Tuskey z, Darth and my guy in Vegas z28.....idk u like that to puff 1 for u..
Enjoy the Holidays...BS.
Everyday is a Holy Day...
Smoking 1 for Tuskey z, Darth and my guy in Vegas z28.....idk u like that to puff 1 for u..
Enjoy the Holidays...BS.
Everyday is a Holy Day...
#48
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
It's not considered work doing what you love...all great porters think A like. Not a porter but i can study & learn a mind. ....
Think theres none 2 look 4 i've honestly talked 2 all. Big names here 2. Reason in wanting 2 finish...i don't need Size nor rpm to make big name # 's.
I gotta or gonna shoot my shot. I want names and #'s 4 a reason ......reading, reseach, talking to or asking Hp builder Junkies....$ good but Facts R better. Specialists on Hp will give 99% of what you've thought or dreamed.
You can make dreams Real......we do have a Rowdy Yates Ls7 head. This is what i do....i'd take my 408 over a bigger engine if i can make a cylinder head....did it once already ...finish, what's another head STR....uncle D ....i'm ready 4 this 1. Did all the as Sold by the factory stuff...
Think theres none 2 look 4 i've honestly talked 2 all. Big names here 2. Reason in wanting 2 finish...i don't need Size nor rpm to make big name # 's.
I gotta or gonna shoot my shot. I want names and #'s 4 a reason ......reading, reseach, talking to or asking Hp builder Junkies....$ good but Facts R better. Specialists on Hp will give 99% of what you've thought or dreamed.
You can make dreams Real......we do have a Rowdy Yates Ls7 head. This is what i do....i'd take my 408 over a bigger engine if i can make a cylinder head....did it once already ...finish, what's another head STR....uncle D ....i'm ready 4 this 1. Did all the as Sold by the factory stuff...