Piston volume
Thread Starter
TECH Regular
Joined: Aug 2007
Posts: 405
Likes: 42
Piston volume I’m building a 6.0 gen 4 block with 3.622 stroke crank and 6.125” rods. I need pistons but I’m not sure what volume to get.. I’ve used the CR calculator on various different websites and seem to get different results each time.. my cylinder heads have a 64cc CC. I’ll probably be running stock mls 0.051” gaskets. I’d like to be around 10.5.
any input would be greatly appreciated
any input would be greatly appreciated
Last edited by The0nlyon3; Dec 26, 2019 at 12:55 AM.
TECH Senior Member
Joined: Jun 2016
Posts: 22,300
Likes: 3,625
From: Central Cal.
Using Summit's calculator, with flat top pistons and the specs you state above, your compression would be right at 11:1
You would need a 4cc dish piston to get 10.5:1
I have found Summit's calculator to be fairly accurate via using known specs and getting known results.
You would need a 4cc dish piston to get 10.5:1
I have found Summit's calculator to be fairly accurate via using known specs and getting known results.
