Rebuilt motor sitting for 3 years. Concerns?
#1
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Hey y'all. I had a ly5 (GM gen 4 5.3 iron block) rebuilt 3 years about. Bearings, rings, honed, surfaced for true and it has been sitting since. I hope to fire it up in the next month or 3. Is there anything I should be concerned something like rust? If so, what are my options? Thanks
#2
TECH Senior Member
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Where was it kept, and how was it protected?
The following 2 users liked this post by G Atsma:
01CamaroSSTx (02-18-2021), Bearden4242 (02-18-2021)
#3
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
In a garage on cradle then in cars engine bay. The engine was stored complete after rebuild minus headers but ports were taped. Also minus front accessories till they were added.
Last edited by Bearden4242; 02-18-2021 at 12:28 PM.
The following users liked this post:
G Atsma (02-18-2021)
#4
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Million yr ole trick..... Little oil/lube in on the piston thru the spark plugs. Turn the crank.
Continue with your build.
Continue with your build.
The following 3 users liked this post by Corona: