Northern Utah Guys - I need a recommendation for a machine shop
#1
Northern Utah Guys - I need a recommendation for a machine shop
New here, but I have been working on a Gen IV 6.0 build.
I'm hoping someone can point me in the right direction for a good shop in Northen Utah that can do a nice rotating assembly balance.
Thanks!
I'm hoping someone can point me in the right direction for a good shop in Northen Utah that can do a nice rotating assembly balance.
Thanks!
#2
and some background info.
I used a machine shop in bountiful, they didn't do a very good job... call it about 600 grit finish on the crank and thrust surface.
Failed thrust bearing, lots of scratching of my head, crank is toast etc.
So here I am with a brand-new crank, looking to have someone decent...
I used a machine shop in bountiful, they didn't do a very good job... call it about 600 grit finish on the crank and thrust surface.
Failed thrust bearing, lots of scratching of my head, crank is toast etc.
So here I am with a brand-new crank, looking to have someone decent...