C6 Bottom 11's @125
Thread Starter
Teching In
Joined: May 2005
Posts: 11
Likes: 0
Originally Posted by Jimmyz
I have and Excedy single disc, it's a good clutch but beware of tuning with the light weight flywheel. My took forEVER and it still hunts a bit on hot starts.
Originally Posted by 1FastC6
How do you find this clutch for streetability?
Jim
TECH Enthusiast
Joined: Nov 2004
Posts: 659
Likes: 0
From: Red Stick, LA
Originally Posted by 1FastC6
I have a C6 which I had modified by Speedway Corvettes in Toronto Canada. Bill (owner of Speedway) and his team did an excellent job with my car. I am very happy with the results. I took it to him on Wednesday and Monday and he promissed it back by Saturday and he was true to his word. The work is very clean and I am very happy with the car. Took it to the track this weekend and the car went 11.38 @ 125 mph with a short of 2.1 the problem I am having is that the clutch is garbage. Does anyone have any suggestions on a clutch? Speedway recomends I get and exedy clutch anyone have any experience with this clutch?
Any help would be greatly appreciated because I can't wait to hit the spray and see what happens, but I can't do that until I fix my clutch problem.
Just as a point of reference the mods to date are:
Stock ported heads with 2.05 valves porting by Speedway
Stock Ported intake " " "
Stock ported throttle body " " "
Com Cams Cam
1 7/8 308 Stainless headers designed and built by Speedway
Fuel system designed by Speedway
Programming by Speedway
Custom exhaust by Speedway.
If anyone wants to get a hold of Bill or ask any question his # is 1-800-not-a-sponsor.
Any help would be greatly appreciated because I can't wait to hit the spray and see what happens, but I can't do that until I fix my clutch problem.
Just as a point of reference the mods to date are:
Stock ported heads with 2.05 valves porting by Speedway
Stock Ported intake " " "
Stock ported throttle body " " "
Com Cams Cam
1 7/8 308 Stainless headers designed and built by Speedway
Fuel system designed by Speedway
Programming by Speedway
Custom exhaust by Speedway.
If anyone wants to get a hold of Bill or ask any question his # is 1-800-not-a-sponsor.
You make me fee slow.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
9 Second Club
Joined: Aug 2004
Posts: 187
Likes: 0
From: Enniskillen,Ontario
Originally Posted by 1FastC6
I have a C6 which I had modified by Speedway Corvettes in Toronto Canada. Bill (owner of Speedway) and his team did an excellent job with my car. I am very happy with the results. I took it to him on Wednesday and Monday and he promissed it back by Saturday and he was true to his word. The work is very clean and I am very happy with the car. Took it to the track this weekend and the car went 11.38 @ 125 mph with a short of 2.1 the problem I am having is that the clutch is garbage. Does anyone have any suggestions on a clutch? Speedway recomends I get and exedy clutch anyone have any experience with this clutch?
Any help would be greatly appreciated because I can't wait to hit the spray and see what happens, but I can't do that until I fix my clutch problem.
Just as a point of reference the mods to date are:
Stock ported heads with 2.05 valves porting by Speedway
Stock Ported intake " " "
Stock ported throttle body " " "
Com Cams Cam
1 7/8 308 Stainless headers designed and built by Speedway
Fuel system designed by Speedway
Programming by Speedway
Custom exhaust by Speedway.
If anyone wants to get a hold of Bill or ask any question his # is 1-800-not-a-sponsor.
Any help would be greatly appreciated because I can't wait to hit the spray and see what happens, but I can't do that until I fix my clutch problem.
Just as a point of reference the mods to date are:
Stock ported heads with 2.05 valves porting by Speedway
Stock Ported intake " " "
Stock ported throttle body " " "
Com Cams Cam
1 7/8 308 Stainless headers designed and built by Speedway
Fuel system designed by Speedway
Programming by Speedway
Custom exhaust by Speedway.
If anyone wants to get a hold of Bill or ask any question his # is 1-800-not-a-sponsor.
.
Originally Posted by 1FastC6
The Car made 543hp to the wheels with no spray.
?
Originally Posted by 1FastC6
Sorry guy's I made one big mistake when I typed this stuff in and didn't realize it until I just read about it.
The car made 453hp NOT 543 it was an honest mistake and I am very sorry , I was tired when I typed that in and wasn't really paying attention.
Also we are having trouble tuning the car anyone know of any programs available?
With response to the new clutch I am very interested please give me your email address.
Thanx
The car made 453hp NOT 543 it was an honest mistake and I am very sorry , I was tired when I typed that in and wasn't really paying attention.
Also we are having trouble tuning the car anyone know of any programs available?
With response to the new clutch I am very interested please give me your email address.
Thanx
Nice commercial dude.
Last edited by denttech; Jul 5, 2005 at 05:49 PM.
Originally Posted by Bill00Formula
11.38 w/ a 2.1 60' is assome. The best I ever ran (on nittos) was a 11.62 at 122.9 w/ a 1.80 60' time.
8 Second Club
Joined: May 2002
Posts: 1,043
Likes: 0
From: Toronto
Originally Posted by denttech
ya whatever...I saw that car on Sunday and it ran a 12.8 at 114 mph .
Cover up?
Nice commercial dude.
.Cover up?
Nice commercial dude.
My wife's full weight H&C M6 Z28 went 11.9 @ 119 on a 17" DOT tire with much less power and a several hundred lbs more weight 
