I got a roller.... Need Help on pickin a Motor
I got a roller.... Need Help on pickin a Motor I got a 99 T/A. It was a M6. I want to put a LS2 or LS6 in it (Which one???). Will it fit in the body? Can i use the stock trans and clutch?
Thanks for the help.
Thanks for the help.
TECH Resident
Joined: Jun 2003
Posts: 862
Likes: 1
From: Los Angeles, CA
and yes,
ive heard they will fit in the car
with minimal work
maybe the only issue would be a wiring harness?
and you can use the stock t56 trans
with minimal mods,
but dont count on that clutch for long
ive heard they will fit in the car
with minimal work
maybe the only issue would be a wiring harness?
and you can use the stock t56 trans
with minimal mods,
but dont count on that clutch for long
look for the 6.0 truck motor, cast iron block, good heads, while its out if you have the $$ make it forged interals with worked heads, put a SC on it and a FAST intake and you are rockin...
We have a stock ls2 here & a forged short block ls2 going together 
Shoot me a PM for pricing & info.
(I also have a never run 6.0l for under 2k!!)
Shoot me a PM for pricing & info.(I also have a never run 6.0l for under 2k!!)
__________________
Jason
Co-Owner, Texas Speed & Performance, Ltd.
2005 Twin Turbo C6
404cid Stroker, 67mm Twins
994rwhp/902lb ft @ 22 psi (mustang dyno) www.Texas-Speed.com
Jason
Co-Owner, Texas Speed & Performance, Ltd.
2005 Twin Turbo C6
404cid Stroker, 67mm Twins
994rwhp/902lb ft @ 22 psi (mustang dyno) www.Texas-Speed.com
Originally Posted by TransAmJoe
I got a 99 T/A. It was a M6. I want to put a LS2 or LS6 in it (Which one???). Will it fit in the body? Can i use the stock trans and clutch?
Thanks for the help.
Thanks for the help.
Get an LS2. Take the left over money and get some AFR heads, cam, etc. You'll be putting out more than that LS7 with money left over...
Trending Topics
TECH Addict
Joined: Feb 2002
Posts: 2,319
Likes: 0
From: Lewisville, Texas
It all depends on how much money you want to spend on the motor.
Originally Posted by TransAmJoe
I got a 99 T/A. It was a M6. I want to put a LS2 or LS6 in it (Which one???). Will it fit in the body? Can i use the stock trans and clutch?
Thanks for the help.
Thanks for the help.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Originally Posted by 10SECDWS6
Get an LS2. Take the left over money and get some AFR heads, cam, etc. You'll be putting out more than that LS7 with money left over...
Left over money? Man you guys are all filthy rich.