Does anyone know of a plug that can be used to plug off the hole for the oil level switch on a LS1 pan? I put a F body pan on a LS2, and it did not come with a switch, and I can't see buying one since the LS2 does not use the switch and there is no connection for it to the PCM.

Regards, John McGraw

 

I am looking for the same thing, i think its 20mm x 1.5. Its a hyd fitting.

 

John,
check out this link:

http://www.cgenterprises.com/drain_plugs_metric.htm

If it is in fact a 20mm X 1.5, then they have a plug for it, and it is real cheap.
I am going to check the dimensions tonight, and order one if it looks right.

Regards, John McGraw

 

Think this fits the bill...
Oil Level Plug

 

The plug that I seen There looked to have a taper thread. We will need a straight thread. Thanks John.

 

Yes Thats it. Thanks John.

 

I found the plugs at a place called Triad. I am going to pick up mine tomorrow, if any one else wants one I will get them and send it to you. They are about $8.00. Thanks John.

 

John,
I would appreciate you getting me one as well. Just drop me a PM letting me know how much including postage. I can PayPal you if you have an account, or send you a check.

Regards, John McGraw

 

John, If you haven't made your parts run I need one too. I had been following John M's post on the conversion side and he pointed me this way. Happy to pay for part and any shipping and handling. Can send paypal, money order or check. You can email or PM me. Thanks, Tony

 

Sorry I went yesterday and picked them up. They only had two. If you can find a Hydralic shop near you, It is a Parker # vsti20x1.5eda3c fitting. If not here is where I got mine Triad 1-937-832-2861 Good Luck John.

 

John, thanks it worked out ok anyway. Went by Advance today and happened to find one in with the oil drain plugs. Had the o-ring and everything.

 

Hi
I need to know what part # for 20x1.5 Oil Sensor Plug at Advance Auto Store.
PLEASE.
Thanks