intake runner length
#2
TECH Fanatic
Thread Starter
iTrader: (9)
Join Date: Feb 2002
Location: Morton IL
Posts: 1,126
Likes: 0
Received 0 Likes
on
0 Posts
I measured them, albeit rather crudely, and came up with 7.25. I believe this is shorter than ls1/6/x manifolds, and good for some power up top. Hopefully this manifold is nice.
#4
If you're after a number to use in any computer simulation program, the measurement is down the port/runner centerline, i.e., average of the long and short side, and it needs to include the distance from the intake flange to the face of the valve. I believe the complete runner length for an LS1 is ~16".