Billet Valve covers
Billet Valve covers I am looking for some billet valve covers . anyone know who makes some . I need a short style cover no taller than stock but also with no coil pack mounts. something smooth . thanks
Billet valve covers and oil pans If you can't find what you are looking for, Jeff can make them for you: http://www.billetfab.com/
He makes very nice custom valve covers and pans. He does custom engraving on the covers as an option.
Steve
He makes very nice custom valve covers and pans. He does custom engraving on the covers as an option.
Steve
Originally Posted by datsbad
I am looking for some billet valve covers . anyone know who makes some . I need a short style cover no taller than stock but also with no coil pack mounts. something smooth . thanks
__________________
Steve Demirjian
Race Engine Development
Oceanside, Ca.
760-630-0450
web: www.raceenginedevelopment.com/
e-mail: race-engine-development@***.net
Steve Demirjian
Race Engine Development
Oceanside, Ca.
760-630-0450
web: www.raceenginedevelopment.com/
e-mail: race-engine-development@***.net
TECH Addict
Joined: Jul 2002
Posts: 2,261
Likes: 0
Originally Posted by datsbad
I am looking for some billet valve covers . anyone know who makes some . I need a short style cover no taller than stock but also with no coil pack mounts. something smooth . thanks
Good Luck.
Last edited by Bink; Dec 24, 2005 at 03:25 PM.
Staging Lane
Joined: Aug 2005
Posts: 50
Likes: 0
From: Melbourne, Oz
We did the billet covers for the Holden Efigy LS2, and are now doing the tooling for a production version.
There is a thread on the ls1.com.au forum about them. Do a search on "Harrop".
There is a thread on the ls1.com.au forum about them. Do a search on "Harrop".
Originally Posted by TUF383
We did the billet covers for the Holden Efigy LS2, and are now doing the tooling for a production version.
There is a thread on the ls1.com.au forum about them. Do a search on "Harrop".
There is a thread on the ls1.com.au forum about them. Do a search on "Harrop".
Very nice
Trending Topics
TECH Addict
Joined: Jul 2002
Posts: 2,261
Likes: 0
Originally Posted by TUF383
We did the billet covers for the Holden Efigy LS2, and are now doing the tooling for a production version.
There is a thread on the ls1.com.au forum about them. Do a search on "Harrop".
There is a thread on the ls1.com.au forum about them. Do a search on "Harrop".
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
TECH Apprentice
Joined: Jun 2002
Posts: 355
Likes: 0
From: Earth
Originally Posted by datsbad
I am looking for some billet valve covers . anyone know who makes some . I need a short style cover no taller than stock but also with no coil pack mounts. something smooth . thanks
I am running the Harrop 8 butterfly intake . the factory valve covers wont even work . the oil cap is in the way . I them switched sides. now the oil fill is in the rear. but now the breather tubes hit and wont let the intake sit flat . It would be nice to raise up the intake about 1" but i douprt that will be reality . whatever i buy has to be no higher than stock at all !!
Staging Lane
Joined: Aug 2005
Posts: 50
Likes: 0
From: Melbourne, Oz
Originally Posted by datsbad
I am running the Harrop 8 butterfly intake . the factory valve covers wont even work . the oil cap is in the way . I them switched sides. now the oil fill is in the rear. but now the breather tubes hit and wont let the intake sit flat . It would be nice to raise up the intake about 1" but i douprt that will be reality . whatever i buy has to be no higher than stock at all !!
Contact damian@harrop.com.au and we will sort something out.
Ken.
TECH Junkie
Joined: Aug 2002
Posts: 3,726
Likes: 0
From: Fort Collins, CO
