good parts for a 383?
Thread Starter
Possible Scammer - Buyer Beware - Issues Unresolved
iTrader: (8)
Joined: Apr 2004
Posts: 582
Likes: 0
good parts for a 383? i'm trying to build a BUDGET 383 stroker, how does this parts list look, anything missing?
eagle 4" crank
callies 6.125" H beam rods
diamond 3.905 -7cc 383 pistons
Diamond Pro-Select Piston Rings, 3.905 Bore, 1.5 - 1.5 - 3.0 mm
ARP pro rod bolts
clevite H rod and maiin bearing
various gaskets
look good? can this be done on the stock block?
eagle 4" crank
callies 6.125" H beam rods
diamond 3.905 -7cc 383 pistons
Diamond Pro-Select Piston Rings, 3.905 Bore, 1.5 - 1.5 - 3.0 mm
ARP pro rod bolts
clevite H rod and maiin bearing
various gaskets
look good? can this be done on the stock block?
Thread Starter
Possible Scammer - Buyer Beware - Issues Unresolved
iTrader: (8)
Joined: Apr 2004
Posts: 582
Likes: 0
Originally Posted by SAM98WS6
yep, just open the bore up and clearance the block for the crank.
He means the bottom of each cylinder will need clearance for the connecting rod. Just put the crank in the block, put one rod and piston in, and then try rotating the crank. You will then see where you need to make your clearances for the remaining rods. Good luck.
