Valve spring kit for FMS F13 cam?
04-08-2006, 10:35 AM
#1
Teching In
Thread Starter
iTrader: (2)
Join Date: Apr 2005
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
Valve spring kit for FMS F13 cam? I'm putting together my cam package - already bought the cam - FMS F13 112LSA +4. The car is a 2006 LS2 C6. Stock heads.
I'm trying to make sure I get the right springs. Right now I'm looking at the AFR Duals - they claim 130lbs of seat pressure.
Should I be in good shape with the AFR dual spring kit (with AFR titanium retainers, locks, etc) and a set of Comp Cams chromemoly 7.425" pushrods?
I'm trying to make sure I get the right springs. Right now I'm looking at the AFR Duals - they claim 130lbs of seat pressure.
Should I be in good shape with the AFR dual spring kit (with AFR titanium retainers, locks, etc) and a set of Comp Cams chromemoly 7.425" pushrods?
04-08-2006, 07:57 PM
#3
Teching In
Thread Starter
iTrader: (2)
Join Date: Apr 2005
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by JZ'sTA
The Patroit springs kit would work very well also.
I would say you made a good guess on PR length.
I would say you made a good guess on PR length.
I think I'll go ahead and order the AFR spring kit and rods. Anyone else have any suggestions? I'll be putting a FAST intake and this cam in the corvette soon. Other mods are LG pro headers, callaway honker intake, and a B&B catback. I'll finish it up with a tune from Jeff Creech once the cam is in.
Any guesses on numbers?
04-09-2006, 10:14 AM
#4
Teching In
Thread Starter
iTrader: (2)
Join Date: Apr 2005
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
Also, another noob question. It seems like one of the recommended timing chains for LS1s is the LS2 chain. Do I have any need to replace my timing chain at the same time?
