Wat Kinda Heads Are These?? (pics)
Thread Starter
TECH Fanatic
iTrader: (15)
Joined: Dec 2005
Posts: 1,588
Likes: 0
From: _Nor caL_ (Bay areA)
Wat Kinda Heads Are These?? (pics) here are the pics of my heads... i took them with my phone cuz my digital camera is broken..so hopefully the pics arnt that bad... the casting on them looks like it says either...906,or 908...and the springs have a purple stripe on them...there suppose to be patriot heads... but they do not say patriot on them...i have been told they look cnc alil bit...and they do look like they have been polished... so what do u guys think? i have also been told they look like heads for a 98, so they told me i will need to buy some valve covers,and coil pack bracket...
Last edited by stangkiller2005; Apr 20, 2006 at 10:49 AM.
those are 97/98 heads.. you can easily tell because the valvecover bolts are around the perimeter... not in the center like the 99+ ones.
i wouldnt put them on my car.... even if i had a 98.
i wouldnt put them on my car.... even if i had a 98.
Thread Starter
TECH Fanatic
iTrader: (15)
Joined: Dec 2005
Posts: 1,588
Likes: 0
From: _Nor caL_ (Bay areA)
Originally Posted by MrDude_1
those are 97/98 heads.. you can easily tell because the valvecover bolts are around the perimeter... not in the center like the 99+ ones.
i wouldnt put them on my car.... even if i had a 98.
i wouldnt put them on my car.... even if i had a 98.
Thread Starter
TECH Fanatic
iTrader: (15)
Joined: Dec 2005
Posts: 1,588
Likes: 0
From: _Nor caL_ (Bay areA)
Originally Posted by No Juice
You'll have to get new or used valve covers for a 98'
yea i was gunna look into that...hopefully they arnt that expensive... other than that.. what do u guys think of the heads? after a good port job... do u think they would put down nice power to the wheels??
I'll trade you valve covers and brackets straight up 
I have a 98 and I need the center bolt covers.
Also, Patriot is very good about tracking their heads. I'm pretty sure all heads they send out have an invoice number or something to that effect stamped on them. Give Gunnar a PM.
I have a 98 and I need the center bolt covers.Also, Patriot is very good about tracking their heads. I'm pretty sure all heads they send out have an invoice number or something to that effect stamped on them. Give Gunnar a PM.
Trending Topics
Thread Starter
TECH Fanatic
iTrader: (15)
Joined: Dec 2005
Posts: 1,588
Likes: 0
From: _Nor caL_ (Bay areA)
Originally Posted by CKZ
I'll trade you valve covers and brackets straight up I have a 98 and I need the center bolt covers.
Also, Patriot is very good about tracking their heads. I'm pretty sure all heads they send out have an invoice number or something to that effect stamped on them. Give Gunnar a PM.
I have a 98 and I need the center bolt covers.Also, Patriot is very good about tracking their heads. I'm pretty sure all heads they send out have an invoice number or something to that effect stamped on them. Give Gunnar a PM.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Five Reasons the Camaro Was the Most Pivotal Player in the Pony Car Wars 2.0
Brett Foote
