LS3 & L92 Info
#61
TECH Senior Member
iTrader: (127)
tb
Originally Posted by Robin L
I have been trying to get good information on the L92 Heads. We have been playing with them a bit and will share that information when we have good data.
GMPP will sell the heads complete fully assembled for about $700.00 a pair.
The good news is that they plan to offer an intake kit also. The intake will come with injectors, fuel rails and a 90 MM throttle body. The target price for the kit is $475.00.
The L92 heads and intake kit will be a very cost effective performace upgrade for the LS engines. Look for the heads to be availble 3rd quarter.
I will advise more on the intake kit when I get a release date.
Robin
GMPP will sell the heads complete fully assembled for about $700.00 a pair.
The good news is that they plan to offer an intake kit also. The intake will come with injectors, fuel rails and a 90 MM throttle body. The target price for the kit is $475.00.
The L92 heads and intake kit will be a very cost effective performace upgrade for the LS engines. Look for the heads to be availble 3rd quarter.
I will advise more on the intake kit when I get a release date.
Robin
or cable throttle?
#63
TECH Fanatic
iTrader: (35)
Join Date: Sep 2004
Location: Maryland/Illinois
Posts: 1,660
Likes: 0
Received 0 Likes
on
0 Posts
The L92 heads and intake kit will be a very cost effective performace upgrade for the LS engines. Look for the heads to be availble 3rd quarter.
An upgrade to LS engines? Maybe I missed something, but don't you need a 4.00" bore to use these heads? Seems the LS1/LS6 guys with the smaller bores are out of luck. Please correct me if I am wrong.
An upgrade to LS engines? Maybe I missed something, but don't you need a 4.00" bore to use these heads? Seems the LS1/LS6 guys with the smaller bores are out of luck. Please correct me if I am wrong.
#64
TECH Addict
iTrader: (16)
Join Date: Jul 2004
Location: Nevada, TX
Posts: 2,218
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by bowtieman81
The L92 heads and intake kit will be a very cost effective performace upgrade for the LS engines. Look for the heads to be availble 3rd quarter.
An upgrade to LS engines? Maybe I missed something, but don't you need a 4.00" bore to use these heads? Seems the LS1/LS6 guys with the smaller bores are out of luck. Please correct me if I am wrong.
An upgrade to LS engines? Maybe I missed something, but don't you need a 4.00" bore to use these heads? Seems the LS1/LS6 guys with the smaller bores are out of luck. Please correct me if I am wrong.
#66
TECH Addict
iTrader: (16)
Join Date: Jul 2004
Location: Nevada, TX
Posts: 2,218
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by bowtieman81
Thanks xfactor...for second I got excited about a L92 top end on my car
Guess I will have to ante up for an LS2/L92 block when this stuff becomes available.
Guess I will have to ante up for an LS2/L92 block when this stuff becomes available.
Brandon
#68
TECH Addict
iTrader: (16)
Join Date: Jul 2004
Location: Nevada, TX
Posts: 2,218
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by bowtieman81
How is GM getting 10.5:1 compression with a 68cc combustion chamber? Are they running really thin head gaskets? I am assuming the pistons are flat tops, anybody seen one?
Brandon
#71
TECH Addict
iTrader: (24)
Originally Posted by Richard@WCCH
Correct:
2.160" intake valve
1.590" exhaust valve
Richard
2.160" intake valve
1.590" exhaust valve
Richard
Thanks!
Adrian
#74
A 4.06 bore x 3.622 stroke equals 375 CI not 378 CI.
The first post say's 378 CI. Either that or the Bore of 4.06 is wrong?
Just thought I'd mention that.
Does anyone know which one it is?
The first post say's 378 CI. Either that or the Bore of 4.06 is wrong?
Just thought I'd mention that.
Does anyone know which one it is?
#77
Originally Posted by firefighter
I believe it's a 4.065 bore could be wrong but I remember somebody saying that.
That still only makes it 376 cubic inches?
Something is wrong with GM's data.
#78
Banned
iTrader: (3)
Originally Posted by Haans249
Have you gotten anything in the works as far as cnc or porting for these budget heads? It seems like these will be a VERY popular option, especially with the pricing. I'm putting together a 446ci Darton Sleeved LS2 super stroker with the L92 heads/sheetmetal intake and would love to see 360+cfm out of these heads. This is all being put together thanks to MizFit Motorsports! I think you've talked to Taylor about this, but I'm just wondering if you have thought about it anymore....my heads are at his shop now
Thanks!
Adrian
Thanks!
Adrian
Richard