VHP XXX Cam
VHP XXX Cam Anyone running this cam in an LS1 F-body, GTO etc? I'm running the VHP 056 cam and I'd like to go a bit more agressive. My set up is Patriot stage 2 heads I believe they are 64 cc. Crane 1.8 rockers, 2800-3000 stall, Vhp 056 cam, K&N aircharger, SW LT's, Bassani cat back. Will the Patriot heads handle that cam? Thanks in advance.
sure will. My buddy was running that setup. should be easy 400 wheel hp. the torquer 2 or magic stick will like too. Personally im running the 056 with stage 2 241's, 1.8 wont work due too xer lobes..based of crane zmax
DUR @ .004" 284* / 290*
DUR @ .050" 222* / 228*
LIFT .551 / .551
OVERLAP 57*
LSA 115
and there will not be any issues with the 1.8 rockers.
here's the 056 cam you have.
DUR @ .004" 278*/ 286*
DUR @ .050" 216*/ 224*
LIFT .551/.551
OVERLAP 53*
LSA 115*
DUR @ .050" 222* / 228*
LIFT .551 / .551
OVERLAP 57*
LSA 115
and there will not be any issues with the 1.8 rockers.
here's the 056 cam you have.
DUR @ .004" 278*/ 286*
DUR @ .050" 216*/ 224*
LIFT .551/.551
OVERLAP 53*
LSA 115*
