Quickest N/a LS7??
Does a resleeved LS2 (427) with LS7 heads/intake count? There will be some impressive results before July is out in a 2800lb RX-7 with this combo on 91 octane 
I'll preguess that the rather mellow cam yielding great driveability this setup does 140mph n/a.
(not mine.. yet)
I'll preguess that the rather mellow cam yielding great driveability this setup does 140mph n/a.
(not mine.. yet)
tell your dad i'm still interested in the 68 camaro but I'd really like to get a video of it. I talked to him on the phone like 2 weeks ago and he was gonna try to bring it to englishtown for me, he should remember me.
Trending Topics
Originally Posted by gnx7
Does a resleeved LS2 (427) with LS7 heads/intake count? There will be some impressive results before July is out in a 2800lb RX-7 with this combo on 91 octane
I'll preguess that the rather mellow cam yielding great driveability this setup does 140mph n/a.
(not mine.. yet)
I'll preguess that the rather mellow cam yielding great driveability this setup does 140mph n/a.
(not mine.. yet)
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
I'd like to know how he ran a low 10 at only 135mph? Was he letting off?
With an automatic you need 137mph to run a 9.99 and killer 60' time.
I assume this is still a 6 speed? You will need to run low 140's for a high 9 second time.
Any video of the run?
With an automatic you need 137mph to run a 9.99 and killer 60' time.
I assume this is still a 6 speed? You will need to run low 140's for a high 9 second time.
Any video of the run?
Thread Starter
10 Second Club
Joined: Jun 2005
Posts: 281
Likes: 0
From: Massachusetts
I have a vid of the first 60' its from my camera phone though, not the greatest quality. it sixties 1.44 on street tires, and yes it only runs 134.75. and he doesnt let off... Turbo 400. Weighs 3500 with driver atm, will be lighter within the next few weeks, it will be in the 9's next time at the track, we are putting stiff sidewall slicks, we had them on for one pass saturday and they rubbed on the top end, but it wheelied past the 60ft(1.42) mark with ease. Jason, ill pm you some pics/specs in about an hour.
On The Tree
Joined: Mar 2002
Posts: 118
Likes: 0
From: Houston
Originally Posted by gnx7
I'd like to know how he ran a low 10 at only 135mph? Was he letting off?
With an automatic you need 137mph to run a 9.99 and killer 60' time.
I assume this is still a 6 speed? You will need to run low 140's for a high 9 second time.
Any video of the run?
With an automatic you need 137mph to run a 9.99 and killer 60' time.
I assume this is still a 6 speed? You will need to run low 140's for a high 9 second time.
Any video of the run?
Thread Starter
10 Second Club
Joined: Jun 2005
Posts: 281
Likes: 0
From: Massachusetts
This was the worst pass of the day on sunday, it was a 10.27 at 134, only a 1.54 60', spun because they had him sit there for the car ahead of them to get off the track. Normally wheelies like a ft higher
Last edited by 35th 427SS; Jul 11, 2006 at 01:06 PM.
Thread Starter
10 Second Club
Joined: Jun 2005
Posts: 281
Likes: 0
From: Massachusetts
http://s39.photobucket.com/albums/e1...09_06_1013.flv the vid sucks because its from my phone, ill get a better one next time at the track
I didn't realize it was a TH400. That explains the mph difference. You will still need a 136mph approx to run a 9.99. You are almost there.
Is this a true LS7 with dry sump oiling/LS7 block or a resleeved block (4.125" bore) with LS7 heads/intake?
Is this a true LS7 with dry sump oiling/LS7 block or a resleeved block (4.125" bore) with LS7 heads/intake?