Which Cam?
Thread Starter
Staging Lane
Joined: Mar 2006
Posts: 64
Likes: 0
Which Cam? done alot of searches but didnt found what i was looking for...
my setup is
stock LS2 short block
PP stage II LS6 style heads Assy. 2.055"/1.57"/59cc
Victor Jr intake
Quick fuel 850cfm carb
Mac mid headers
MSD 6LS
TH350
DANA 44 (since this is going into 91 C4...3000lb w/driver)
TCI 4200 stall
any cam suggestion without flycuting the pistons?
the car is drag use only....
my setup is
stock LS2 short block
PP stage II LS6 style heads Assy. 2.055"/1.57"/59cc
Victor Jr intake
Quick fuel 850cfm carb
Mac mid headers
MSD 6LS
TH350
DANA 44 (since this is going into 91 C4...3000lb w/driver)
TCI 4200 stall
any cam suggestion without flycuting the pistons?
the car is drag use only....
Don't know about a carb application, but I'm dropping the GT1-1 in mine (with 60cc heads) in a couple weeks...it's a Lingenfelter grind 229/242 .631. I've seen people get some nice results with a 234/240 .618. Depending on the LSA/overlap, you may have to flycut, but I don't think so. People have also posted good numbers with the Hellion cam that Arizona Power and Sound sells.
Thread Starter
Staging Lane
Joined: Mar 2006
Posts: 64
Likes: 0
thanks BigRon for ur reply, i just want to know if anyone used same heads that i have with LS2 stock short block and big cam without flycut. i called Thunder racing, SDPC and Texas Speed all of them said that i have to check VTP clearance.
any "been there done that"
any "been there done that"
